Catalogs > Safety Products Catalog > Logic > Programmable Safety Solutions > SmartGuard 600 Controller
SmartGuard 600 Controller
| Introduction |  |
Networking with SmartGuard 600 Controllers | |
Configuration and Programming | |
Safety System Management | |
Typical Applications | |
| Catalog Numbers and Related Products | |
Specifications | |
Typical SmartGuard 600 System Architectures | |
RSNetWorx Software for DeviceNet Network | |
Guard I/O™ Modules | |
You can program and configure the SmartGuard 600 controller through its USB port, through a DeviceNet connection or through an Ethernet connection. The SmartGuard's USB port has limited pass-through capabilities, letting you configure other devices on DeviceNet networks. You can use any type of A-to-B connection USB cable that supports USB 1.x or 2.0. Alternatively, you can connect to the SmartGuard controller through its DeviceNet port via a PCD card or a PC connected to an EtherNet/IP-to-DeviceNet linking device or gateway. You can also connect the 1752-L24BBBE SmartGuard controller to a PC's Ethernet port using a Category 5 Ethernet cable.