Catalogs > Safety Products Catalog > Power > Safety Isolation System
Safety Isolation System
| Introduction |  |
Specifications | |
Sequence of Operation | |
Communication | |
Product Selection | |
Introduction | |
| Optional Expansion Module | |
Remote Lockout Station | |
Verification Module | |
Multiplexer/Permissive Module | |
System Selection Process | |
|
| Remote Lockout Station |
Remote Lockout Station
The Remote Lockout Station (RLS) is a key component of the ElectroGuard system. The RLS is typically located at the hazard location and provides the signal to the power panel to initiate the LOTO process. The RLS is available in several configuration and enclosure types.
Dual Remote Lockout Station
The Dual Remote Lockout Station functions the same as a single or standard Remote Lockout Station. The difference between a single and a dual RLS is that the dual RLS can be used to control two ElectroGuard systems from the same RLS. A good example of this is a machine that has two separate incoming power sources. Using a dual RLS and two ElectroGuard both ElectroGuard can be controlled from the same station.
Bulletin 2030 Remote Lockout Station
| 2030 | — | RLS | J | G | D | |||
| a | b | c |
| a | |
| Enclosure Type | |
| Code | Description |
| C | Type 4X watertight stainless steel |
| F | Type 4 watertight painted steel/IP65 |
| J | Type 12 dusttight/IP54 |
| E | Type 7 and 9 hazardous location bolted |
| b | |
| System Isolated Light Color | |
| Code | Color |
| G | Green |
| c | |
| Dual RLS | |
| Code | Description |
| D | Dual |
| Blank | Single |
Replacement Switch Module: 2030-RSA1