Bulletin 700S-P and 700S-PK Heavy-Duty Safety Control Relay

Features

• Mechanically linked contacts meet IEC 947-5-1-L
  
• 2…12 poles – all mechanically linked
  
• Red cover for easy identification of safety circuits
  
• Tamper resistant cover helps prevent changes which could jeopardize safety
  
• IEC mechanically linked contacts symbol displayed on front
  
• Visual indication of contact state
  
• Ideal for use in safety circuits
  

Certifications

• cULus Listed (File No. E14840, Guide NKCR/NKCR7)
  CE Certified
  ABS Certified
  

Standards Compliance

• UL 508
  
• CSA C22.2 No. 14
  

Product Selection

Build a Catalog Number

Bulletin 700S-P (10 A) Safety Control Relays — AC and DC Coil Voltages

Contacts		AC Coils	24V DC Coils
		Open Type Panel Mount Relay Rail Mount	Open Type Panel Mount Relay Rail Mount	Open Type DIN Rail Mount
		Cat. No.⋆	Cat. No.⋆	Cat. No.⋆
N.O.	N.C.
3	1	700S-P310Ä	700S-DCP310Z24	700S-DCP310DZ24
2	2	700S-P220Ä	700S-DCP220Z24	700S-DCP220DZ24
7	1	700S-P710Ä	700S-DCP710Z24	700S-DCP710DZ24
6	2	700S-P620Ä	700S-DCP620Z24	700S-DCP620DZ24
5	3	700S-P530Ä	700S-DCP530Z24	700S-DCP530DZ24
4	4	700S-P440Ä	700S-DCP440Z24	700S-DCP440DZ24
3	5	700S-P350Ä	700S-DCP350Z24	700S-DCP350DZ24
10	2	700S-P1020Ä	700S-DCP1020Z24	700S-DCP1020DZ24

ÄAC Coil Voltage Code

The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No.
Example: Cat. No. 700S-P310 becomes Cat. No. 700S-P310A1 for a 120V AC coil.

[V]	24	115...120	230...240	460...480
60 Hz	A24	A1	A2	A4
⋆ For other coil voltages, consult your local Rockwell Automation sales office or Allen-Bradley distributor.

IEC 947-5-1 Annex L has 2 requirements for a relay to meet for mechanically linked contacts:
1.) If a N.O. contact welds, all the N.C. contacts will remain open and meet a 2500V impulse test.
2.) If a N.C. contact welds, all the N.O. contacts will remain open and meet a 2500V impulse test.
Bul. Nos. 700S-P and 700S-DCP relays meet these requirements including the 2500V impulse test.
The relays shown on this page are shipped from the factory with the Bul. 700-CPS safety cartridge installed and cannot be converted to N.O. or N.C. in the Field.

Bulletin 700S-PK (20 A) Safety Control Relays

Contacts		Coil Voltage	Cat. No.
N.O.	N.C.
7	1	110V AC	700S-PK710A1
6	2	110V AC	700S-PK620A1
5	3	110V AC	700S-PK530A1
4	4	110V AC	700S-PK440A1
3	5	110V AC	700S-PK350A1
10	2	110V AC	700S-PK1020A1
3	1	110V AC	700S-PK310A1
7	1	24V DC	700S-DCPK710Z24
6	2	24V DC	700S-DCPK620Z24
5	3	24V DC	700S-DCPK530Z24
4	4	24V DC	700S-DCPK440Z24
3	5	24V DC	700S-DCPK350Z24
10	2	24V DC	700S-DCPK1020Z24
3	1	24V DC	700S-DCPK310Z24

Specifications

Type

700S-P

700S-PK

Electrical

Contact Rating Continuous

10 A @ 600V AC 5 A @ 600V DC

20 A @ 600V AC 10 A @ 600V DC

Ratings Make/Break

AC

NEMA A600

NEMA A600

DC

NEMA P600

NEMA P600

Minimum Contact Switching Ratings

10V, 50 mA

3 Hp @ 240V AC - N.O. 2 Hp @ 240V AC - N.O./N.C. 1 HP @ 120V AC - N.O./N.C. 20 A resistive heating to 600V AC 20 A Tungsten lighting load to 480V AC

DC Switching

Contacts in Series

Volts DC

Volts DC

24V

64V

125V

250V

500V

600V

24V

64V

125V

250V

500V

600V

1

5 A

2.2 A

1.1 A

0.55 A

0.24 A

0.2 A

10 A

5 A

2.2 A

0.55 A

0.24 A

0.2 A

2

10 A

10 A

5 A

2 A

0.7 A

0.5 A

20 A

10 A

5 A

2 A

0.7 A

0.5 A

3

—

—

7 A

3 A

1.5 A

1.0 A

—

15 A

7 A

3 A

1.5 A

1.0 A

4

—

—

10 A

5 A

2.5 A

1.5 A

—

20 A

10 A

5 A

2.5 A

1.5 A

Coil Voltage Range⋆

AC

85…110%

85…110%

DC

80…110%

80…110%

Battery Charging

85…115%

85…115%

Coil Consumption

50 Hz

60 Hz

50 Hz

60 Hz

AC

Inrush

132 VA

138 VA

132 VA

138 VA

Sealed

19.3 VA

19 VA

19.3 VA

19 VA

DC

Inrush

12.7 W

12.7 W

Sealed

12.7 W

12.7 W

Additional Contact Rating for AC Single-Phase Loads

—

3 HP @ 240V AC - N.O. 2 HP @ 240V AC - N.O./N.C. 1 HP @ 130V AC - N.O./N.C. 20 A Resistive Heating to 600V AC 20 A Tungsten Lighting Load to 480V AC Cartridge Cat. No. Bulletin 700S-CMS

Mechanical

Mechanically Linked Contacts

All contacts are mechanically linked per IEC 947-5-1 annex L for 2 to 12 poles

All contacts are mechanically linked per IEC 947-5-1 annex L for 2 to 12 poles

Operating Time

Pickup

AC – 10…20 ms DC – 30…50 ms

AC – 10…20 ms DC – 30…50 ms

Dropout

AC – 10…20 ms DC – 20…33 ms

AC – 10…20 ms DC – 20…33 ms

Mechanical Life

10 million operations

Construction

Contact Arrangement

2 to 12 Poles, Double Break Contacts N.O. or N.C. (8 N.C. Maximum)

2 to 12 Poles, Convertible to N.O. or N.C. (8 N.C. Maximum)

Contact Material/Design

Silver Nickel/Bifurcated

Silver Cadmium Oxide

Mounting

Panel mount or mount on 700-MP Relay or DIN Rail Horizontal Mounting Recommended

Panel mount or mount on 700-MP Relay or DIN Rail Horizontal Mounting Recommended

Environmental

Temperature

Operating§

–20…+65 °C (–4…+149 °F)

–20…+65 °C (–4…+149 °F)

Storage

–40…+65 °C (–40…+149 °F)

–40…+65 °C (–40…+149 °F)

Wire Terminations

Wire size per UL/CSA

#18 AWG…(2) #12 AWG

#18 AWG…(2) #12 AWG

Tightening Torque

8…12 lb•in (0.9…1.4 N•m)

8…12 lb•in (0.9…1.4 N•m)

⋆ Coil voltage required for proper operation (percent of rated coil voltage).

§ Temperature inside the panel.

Approximate Dimensions

Dimensions are shown in millimeters (inches). Dimensions are not intended for manufacturing purposes.

2- and 4-pole Bulletin 700S-P Relay — Approximate Shipping Weight AC – 0.68 kg (1.5 lb), DC – 1.34 kg (2.95 lb)

6- and 8-pole Bulletin 700S-P Relay Approximate Shipping Weight AC – 0.79 kg (1.75 lb), DC – 1.45 kg (3.20 lb)

10- and 12-pole Bulletin 700S-P, Approximate Shipping Weight AC – 1.02 kg (2.25 lb), DC – 1.68 kg (3.7 lb)

Relay Rail

DIN Rail