Catalogs > Safety Products Catalog > Power > Contactors and Control Relays > Bulletin 700S-P and 700S-PK Heavy-Duty Safety Control Relay
Bulletin 700S-P and 700S-PK Heavy-Duty Safety Control Relay
Product Selection| Build a Catalog Number |
Bulletin 700S-P (10 A) Safety Control Relays — AC and DC Coil Voltages
ÄAC Coil Voltage Code
The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No.
Example: Cat. No. 700S-P310 becomes Cat. No. 700S-P310A1 for a 120V AC coil.
| [V] | 24 | 115...120 | 230...240 | 460...480 |
| 60 Hz | A24 | A1 | A2 | A4 |
| ⋆ For other coil voltages, consult your local Rockwell Automation sales office or Allen-Bradley distributor. | ||||
IEC 947-5-1 Annex L has 2 requirements for a relay to meet for mechanically linked contacts:
1.) If a N.O. contact welds, all the N.C. contacts will remain open and meet a 2500V impulse test.
2.) If a N.C. contact welds, all the N.O. contacts will remain open and meet a 2500V impulse test.
Bul. Nos. 700S-P and 700S-DCP relays meet these requirements including the 2500V impulse test.
The relays shown on this page are shipped from the factory with the Bul. 700-CPS safety cartridge installed and cannot be converted to N.O. or N.C. in the Field.
Bulletin 700S-PK (20 A) Safety Control Relays
| Contacts | Coil Voltage | Cat. No. | |
| N.O. | N.C. | ||
| 7 | 1 | 110V AC | 700S-PK710A1 |
| 6 | 2 | 110V AC | 700S-PK620A1 |
| 5 | 3 | 110V AC | 700S-PK530A1 |
| 4 | 4 | 110V AC | 700S-PK440A1 |
| 3 | 5 | 110V AC | 700S-PK350A1 |
| 10 | 2 | 110V AC | 700S-PK1020A1 |
| 3 | 1 | 110V AC | 700S-PK310A1 |
| 7 | 1 | 24V DC | 700S-DCPK710Z24 |
| 6 | 2 | 24V DC | 700S-DCPK620Z24 |
| 5 | 3 | 24V DC | 700S-DCPK530Z24 |
| 4 | 4 | 24V DC | 700S-DCPK440Z24 |
| 3 | 5 | 24V DC | 700S-DCPK350Z24 |
| 10 | 2 | 24V DC | 700S-DCPK1020Z24 |
| 3 | 1 | 24V DC | 700S-DCPK310Z24 |
