Bulletin 100S-C/104S-C Safety Contactors

Mechanically linked N.C. auxiliary contacts
Front-mounted auxiliary contacts:
Gold bifurcated
Permanently fixed
Protective cover to prevent manual operation
Red contact housing foreasy identification
Incorporates IEC 60947-5-1 “Mechanically Linked” or IEC 60947-4-1 "Mirror Contact" symbol
AC and DC operating coils
SUVA Third-Party certification

Bulletin 100S-C/104S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary contacts are ideally suited for low-energy applications or feedback control circuits with multiple series-connected N.C. auxiliary contacts.

Your order must include: cat. no. of the contactor specified with coil voltage code and, if required, cat. no. of any accessories and/or replacement coils.

Standards Compliance and Certifications

Standards Compliance

EN50205
CSA C22.2 No. 14
UL 508
EN/IEC 60947-4
IEC 60947-4-1 Annex H — Mirror Contacts
IEC 60947-5-1 Annex L — Mechanically Linked Contacts

Certifications

SUVA Third-Party Certified
CE Marked
cULus Listed (File No. E3125;
Guide NLDX, NLDX7)

Product Selection

3-Pole AC- and DC-Operated Contactors

I_e [A]		Ratings for Switching AC Motors — AC-2, AC-3, AC-4										Aux. Contacts		Cat. No.⋆ ‡
		3-Phase kW (50 Hz)				Hp (60 Hz)
AC-3	AC-1	230V	400V/ 415V	500V	690V	1-Phase		3-Phase
						115V	230V	200V	230V	460V	575V	N.O.	N.C.
9	32	3	4	4	4	1/2	1-1/2	2	2	5	7-1/2	0	5	100S-C09Ä05BC
												1	4	100S-C09Ä14BC
12	32	4	5.5	5.5	5.5	1/2	2	3	3	7-1/2	10	0	5	100S-C12Ä05BC
												1	4	100S-C12Ä14BC
16	32	5.5	7.5	7.5	7.5	1	3	5	5	10	15	0	5	100S-C16Ä05BC
												1	4	100S-C16Ä14BC
23	32	7.5	11	13	10	2	3	5	7-1/2	15	15	0	5	100S-C23Ä05BC
												1	4	100S-C23Ä14BC
30	65	10	15	15	15	2	5	7-1/2	10	20	25	0	4	100S-C30Ä04BC
												1	4	100S-C30Ä14BC
37	65	11	18.5/20	20	18.5	3	5	10	10	25	30	0	4	100S-C37Ä04BC
												1	4	100S-C37Ä14BC
43	85	13	22	25	22	3	7-1/2	10	15	30	30	0	4	100S-C43Ä04BC
												1	4	100S-C43Ä14BC
60	100	18.5	32	37	32	5	10	15	20	40	50	0	4	§	100S-C60Ä04BC
												1	4	§	100S-C60Ä14BC
72	100	22	40	45	40	5	15	20	25	50	60	0	4	§	100S-C72Ä04BC
												1	4	§	100S-C72Ä14BC
85	100	25	45	55	45	7-1/2	15	25	30	60	60	0	4	§	100S-C85Ä04BC
												1	4	§	100S-C85Ä14BC
97	130	30	55	55	55	10	15	30	30	75	75	0	4	§	100S-C97Ä04BC
												1	4	§	100S-C97Ä14BC

⋆ For other contact configurations and full product details, please contact your local Rockwell Automation sales office or Allen-Bradley distributor.
‡ If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 100S-C09Ä05BC becomes Cat. No. 100S-C09Ä05C.
§ Bifurcated front-mount auxiliary contacts on Cat. Nos. 100S-C60…C97 conform to mirror contact performance only.
Ä Coil Voltage Code, see Ä Coil Voltage Code and Terminal Position

Cat. No.
100S-C09Ä05C
Line Side

Cat. No.
100S-C09UÄ05C
Load Side

4-Pole AC- and DC-Operated Contactors

I_e [A]		Ratings for Switching AC Motors										Contact Configuration				Cat. No.⋆ §	Price
		AC-2, AC-3, AC-4				Hp (60 Hz)
		3-Phase kW (50 Hz)‡										Main Pole		Auxillary Contacts
AC-3	AC-1	230V	400V/ 415V	500V	690V	1-Phase		3-Phase ‡									AC Coil	DC Coil

						115V	230V	200V	230V	460V	575V	N.O.	N.C.	N.O.	N.C.
9	32	3	4	4	4	1/2	1-1/2	2	2	5	7-1/2	4	0	0	4	100S-C09Ä404BC
												3	1	0	4	100S-C09Ä304BC
12	32	4	5.5	5.5	5.5	1/2	2	3	3	7-1/2	10	4	0	0	4	100S-C12Ä404BC
												3	1	0	4	100S-C12Ä304BC
16	32	5.5	7.5	7.5	7.5	1	3	5	5	10	15	4	0	0	4	100S-C16Ä404BC
												3	1	0	4	100S-C16Ä304BC
23	32	7.5	11	13	10	2	3	5	7-1/2	15	15	4	0	0	4	100S-C23Ä404BC
												3	1	0	4	100S-C23Ä304BC

⋆ For other contact configurations, please contact your local Rockwell Automation sales office or Allen-Bradley distributor.
‡ Three-phase ratings only apply to contactors with at least three N.O. power poles.
Ä Coil Voltage Code, see Ä Coil Voltage Code and Terminal Position
§ If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 100S-C09Ä404BC becomes Cat. No. 100S-C09Ä404C.

Reversing AC- and DC-Operated Contactors

3 Main Contacts
Includes Mechanical/Electrical Interlock
Includes Reversing Power Wiring

I_e [A]		Ratings for Switching AC Motors										Aux. Contacts Installed per Contactor		Cat. No.⋆ ‡
		AC-2, AC-3, AC-4
		3-Phase kW (50 Hz)				Hp (60 Hz)
AC-3	AC-1	230V	400V/ 415V	500V	690V	1-Phase		3-Phase
						115V	230V	200V	230V	460V	575V	N.O.	N.C. §
9	32	3	4	4	4	1/2	1-1/2	2	2	5	7-1/2	0	6	104S-C09Ä012BC
												1	5	104S-C09Ä210BC
12	32	4	5.5	5.5	5.5	1/2	2	3	3	7-1/2	10	0	6	104S-C12Ä012BC
												1	5	104S-C12Ä210BC
16	32	5.5	7.5	7.5	7.5	1	3	5	5	10	15	0	6	104S-C16Ä012BC
												1	5	104S-C16Ä210BC
23	32	7.5	11	13	10	2	3	5	7-1/2	15	15	0	6	104S-C23Ä012BC
												1	5	104S-C23Ä210BC
30	65	10	15	15	15	2	5	7-1/2	10	20	25	0	5	104S-C30Ä010BC
												1	5	104S-C30Ä210BC
37	65	11	18.5/20	20	18.5	3	5	10	10	25	30	0	5	104S-C37Ä010BC
												1	5	104S-C37Ä210BC
43	85	13	22	25	22	3	7-1/2	10	15	30	30	0	5	104S-C43Ä010BC
												1	5	104S-C43Ä210BC
60	100	18.5	32	37	32	5	10	15	20	40	50	0	5	♣	104S-C60Ä010BC
												1	5	♣	104S-C60Ä210BC
72	100	22	40	45	40	5	15	20	25	50	60	0	5	♣	104S-C72Ä010BC
												1	5	♣	104S-C72Ä210BC
85	100	25	45	55	45	7-1/2	15	25	30	60	60	0	5	♣	104S-C85Ä010BC
												1	5	♣	104S-C85Ä210BC
97	130	30	55	55	55	10	15	30	30	75	75	0	5	♣	104S-C97Ä010BC
												1	5	♣	104S-C97Ä210BC

⋆ For other contact configurations, please contact your local Rockwell Automation sales office or Allen-Bradley distributor.
‡ If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 104S-C09Ä05BC becomes Cat. No. 104S-C09Ä05C.
§ One of the N.C. auxiliary contacts is supplied as part of the mechanical/electrical interlock.
♣ Bifurcated front-mount auxiliary contacts on Cat. Nos. 104S-C60…C97 conform to mirror contact performance only.
Ä Coil Voltage Code, see Ä Coil Voltage Code and Terminal Position

Ä Coil Voltage Code and Terminal Position

The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No. Example: 120V, 60Hz: Cat. No. 100S-C09Ä05BC becomes Cat. No.100S-C09D05BC.

[V]	12	24	32	36	42	48	100	100-110	110	120	127	200	200-220	208	208-240	220-230
AC, 50 Hz	R	K	V	W	X	Y	KP	—	D	P	S	KG	L	—	—	F
AC, 60 Hz	Q	J	—	V	—	X	—	KP	—	D	—	—	KG	H	L	—
AC, 50/60 Hz	–	KJ	—	—	—	KY	KP	—	KD	—	—	KG	KL§	—	—	KL§

[V]	230	230-240	240	277	347	380	380-400	400	400-415	440	480	500	550	600
AC, 50 Hz	—	VA	T	—	—	—	N	—	G	B	—	M	C	—
AC, 60 Hz	—	—	A	T	I	E	—	—	—	N	B	—	—	C
AC, 50/60 Hz	KF	—	KA	—	—	—	—	KN	—	KB	—	—	—	—

§ Not available in 100S/104S-C97 contactors

[V]			9	12	24	36	48	60	64	72	80	110	115	125	220	230	250
100S/104S-C09…C43	Standard	DC	ZR	ZQ	ZJ	ZW	ZY	ZZ	ZB	ZG	ZE	ZD	ZP	ZS	ZA	ZF	ZT
	with Integrated Diode		—	—	DJ	—	—	—	—	—	—	—	—	—	—	—	—
	Electronic with Integrated Diode		—	—	EJ	—	—	—	—	—	—	—	—	—	—	—	—
100S/104S-C60…C97	with Integrated Diode		DR	DQ	DJ	DW	DY	DZ	DB	DG	DE	DD	DP	DS	DA	DF	DT

Coil Terminal Position

All contactors are delivered with the coil terminals located on the line side.
For load side coil terminations, insert a U prior to the coil voltage code.
Example: Cat. No. 100S-C09UD05BC.

Bulletin 100S-C/104S-C Accessories

Control Modules (For 100S-C09…C97 contactors)

	Description		Connection Diagrams	For Use With	Cat. No.
	Pneumatic Timing Modules Pneumatic timing element contacts switch after the delay time. The contacts on the main control relay continue to operate without delay.	On-Delay 0.3…30 s Range		100-C or 700-CF with AC coils or DC electronic coils	100-FPTA30
		1.8…180 s Range		100-C or 700-CF with AC coils or DC electronic coils	100-FPTA180
		Off-Delay 0.3…30 s Range		100-C all, 700-CF all	100-FPTB30
		1.8…180 s Range		100-C all, 700-CF all	100-FPTB180
	Electronic Timing Modules — On-Delay Delay of the contactor or control relay solenoid. The contactor or control relay is energized at the end of the delay time.	On-Delay 1…30 s Range		100-C or 700-CF with 24…48V DC coils	100-ETA3
		1…30 s Range			100-ETA30
		10…180 s Range			100-ETA180
		110…240V, 50/60 Hz 110…250V DC
		On-Delay 0.1…3 s Range		100-C or 700-CF with 24…48V DC coils	100-ETAZJ3
		1…30 s Range			100-ETAZJ30
		10…180 s Range			100-ETAZJ180
		24…48V DC
	Electronic Timing Modules — Off-Delay Delay of the contactor or control relay solenoid. After interruption of the control signal, the contactor or control relay is deenergized at the end of the delay time.	Off-Delay 0.3…3 s Range		100-C09…C37 or 700-CF with 24V 50/60 Hz coils	100-ETBKJ3
		1…30 s Range			100-ETBKJ30
		10…180 s Range			100-ETBKJ180
		24V, 50/60 Hz
		Off-Delay 0.3…3 s Range		100-C or 700-CF with 110…240V 50/60 Hz coils	100-ETB3
		1…30 s Range			100-ETB30
		10…180 s Range			100-ETB180
		110…240V, 50/60 Hz
	Electronic Timing Modules Delay of the contactor solenoid. Contactor K 3 (Y) is de-energized (off) and K 2 (D) is energized (on) after the end of the set Y end time. (Switching delay at 50 ms.) Continuous adjustment range High repeat accuracy	Transition Time Y Contactor 1…30 s Range 110…240V, 50/60 Hz		100-C with 110…240V, 50/60 Hz coils	100-ETY30
	Mechanical Interlocks For interlocking of two contactors. Common interlock for all Bul. 100-C contactor sizes Interlocking of different sizes possible Mechanical and electrical interlocking possible in one module by means of integrated auxiliary contacts 9 mm dovetail connector included	Mechanical only, without auxiliary contacts		100-C (except 100-C40, -C90)	100-MCA00
		Mechanical/ electrical interlock with 2 N.C. auxiliary contacts		100-C (except 100-C40, -C90)	100-MCA02
	Mechanical Latch Following contactor latching, the contactor coil is immediately de-energized (off) by the N.C. auxiliary contact (65-66). Electrical or manual release 1 N.O. + 1 N.C. auxiliary contacts Suitable for all Bul. 100-C contactor sizes, 9…97 A	Maximum command duration 0.03…10 s		100-C with AC or 24V DC electronic coils (except 100-C90)	100-FL11Ä

Package Quantity = 1

Ä Coil Voltage Code

The cat. no. as listed is incomplete. Select a voltage suffix code from the table below to complete the Cat. No. Example: 120V, 60 Hz:
Cat. No. 100-FL11Ä becomes Cat. No. 100-FL11D.

[V]⋆

24V

48V

100V

110V

120V

230-240V

240V

277V

380-400V

400-415V

440V

480V

AC, 50 Hz

—

AC, 60 Hz

—

⋆ For special voltages, please contact your local Rockwell Automation sales office or Allen-Bradley distributor.

Control Modules (For 100S-C09…C97 contactors), Continued

Description		Voltage Range	Connection Diagrams	For Use With	Cat. No.
DC Interface (Electronic) Interface between the DC control signal (PLC) and the AC operating mechanism of the contactor. Requires no additional surge suppression on the relay coils		Input: 12V DC Output: 110…240V AC		100-C with AC coils 110…240V AC	100-JE12
		Input: 18…30V DC Output: 110…240V AC			100-JE
		Input: 48V DC Output: 110…240V AC			100-JE48
Surge Suppressors For limitation of coil switching transients. Plug-in, coil mounted. Suitable for 100-C contactor sizes, 9…97 A. RC, varistor, and diode versions.	RC Module AC operating mechanism	24…48V AC, 50/60 Hz		100-C with AC coils	100-FSC48
		110…280V AC, 50/60 Hz			100-FSC280
		380…480V AC, 50/60 Hz			100-FSC480
	Varistor Module AC/DC operating mechanism	12…55V AC/ 12…77V DC		100-C with AC coils or 100-C09…-C43 with DC coils	100-FSV55
		56…136V AC/ 78…180V DC		100-C with AC coils or 100-C09…-C43 with DC coils	100-FSV136
		137…277V AC/ 181…350V DC		100-C with AC coils or 100-C09…-C43 with DC coils	100-FSV277
		278…575V AC		100-C with AC coils or 100-C09…-C43 with DC coils	100-FSV575
	Diode Module DC operating mechanism	12…250V DC		100-C09…-C43 with DC coils	100-FSD250

Assembly Components (For 100S-C09…C97 contactors)

	Description	For Use With	Pkg. Quantity⋆	Cat. No.
	Dovetail Connectors For use in contactor and starter assemblies. Single Connector — 0 mm Spacing	100-C	10	100-S0
Cat. No. 100-S0	Dovetail Connectors For use in contactor and starter assemblies. Dual Connector — 9 mm Spacing			100-S9
	Protective Covers Provides protection against unintended manual operation For contactors and front-mounted auxiliary contacts, pneumatic timers, and latches	100-C all	1	100-SCCA
Cat. No. 100-SCCA
		100-FA, -FB, -FC, -FP, -FL;	10	100-SCFA
Cat. No. 100-SCFA
	Reversing Power Wiring Kits For reversing connection with a solid-state or thermal overload relay	100-C09…C23	1	105-PW23
		100-C30…C37		105-PW37
		100-C43		105-PW43
Cat. No. 105-PW23		100-C60…C97		105-PW85
	DIN (#3) symmetrical hat rail 35 x 7.5 x 1 m	100-C	10	199-DR1

⋆ Must be ordered in multiples of package quantities.

Marking Systems (For 100S-C09…C97 contactors)

	Description	Pkg. Qty.⋆	Cat. No.
	Label Sheet 105 self-adhesive paper labels each, 6 x 17 mm	10	100-FMS
	Marking Tag Sheet 160 perforated paper labels each, 6 x 17 mm, to be used with a transparent cover	10	100-FMP
	Transparent Cover To be used with marking tag sheets	100	100-FMC
	Marking Tag Adapters To be used with marking tag: System V4/V5	100	100-FMA1
	Marking Tag Adapters To be used with marking tag: System 1492 W	100	100-FMA2

⋆ Must be ordered in multiples of package quantities.

Terminal Kits (For 100S-C09…C97 contactors)

	Description	Max. Current Ratings and Wire Sizes		Pkg. Qty.⋆	Cat. No.
	Stab Connector Kit Dual stab (0.250 in.) for 100-C coil terminals For 100-C09…C97 contactors			20	199-SC2
	Stab Connector Kit Dual stab (0.250 in.) for 100-C power terminals For 100-C09…C23 contactors			100	199-SC10
	3-Pole Terminal Lug Kit For Cat. No. 100-C09…C23 (Line side)	IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.)	45 A (4…16 mm²‡ , fine stranded w/ferrule) 45 A (4…25 mm², coarse stranded/solid) 40 A (#10…4 AWG, stranded/solid)	1	100-CTN23
	3-Pole Terminal Lug Kit For Cat. No. 100-C09…C23 (Load side)	IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.)	45 A (4…16 mm²‡ , fine stranded w/ferrule) 45 A (4…25 mm², coarse stranded/solid) 40 A (#10…4 AWG, stranded/solid)	1	100-CTL23
	3-Pole Terminal Lug Kit For Cat. No. 100-C30…C37 (Line and load side)	IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.)	60 A (4…16 mm²‡ , fine stranded w/ferrule) 60 A (4…25 mm², coarse stranded/solid) 55 A (#10…4 AWG, stranded/solid)	1	100-CT37
	1-Pole Terminal Lug Kit For Cat. No. 100-C43	IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.)	90 A (6…35 mm², fine stranded w/ferrule) 90 A (6…50 mm², coarse stranded/solid) 75 A (#8…2 AWG, stranded/solid)	3	100-CT43
	1-Pole Terminal Lug Kit For Cat. No. 100-C60…C97	IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.)	130 A (10…70 mm², fine stranded w/ferrule) 130 A (10…95 mm², coarse stranded/solid) 130 A (#8…2/0 AWG, stranded/solid)	3	100-CT85
	3-Pole Paralleling Kit For Cat. No. 100-C09…C23	IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.)	100 A (35…70 mm², fine stranded w/ferrule) 100 A (35…95 mm², coarse stranded/solid) 100 A (#0…2/0 AWG, stranded/solid)	2	100-CP23
	3-Pole Paralleling Kit For Cat. No. 100-C30…C37	IEC @ 40 °C IEC @ 40 °C UL/CSA (Encl.)	150 A (35…70 mm², fine stranded w/ferrule) 150 A (35…95 mm², coarse stranded/solid) 150 A (#0…2/0 AWG, stranded/solid)	2	100-CP37

⋆ Must be ordered in package quantities.
‡ 16 mm² max. according to IEC 60947; actual max. 25 mm².

Specifications

			100S/104S-C
			09	12	16	23	30	37	43	60	72	85	97
Coil Type :	Conventional		X	X	X	X	X	X	X	X	X	X	X
	Electronic — EI		—	—	—	—	—	—	—	—	—	—	—
Conductor Cross Sections - Main Contacts Terminal type						⋆			‡			§
	(1) conductor (2) conductors	[mm²] [mm²]	1…4 1…4				2.5…10 2.5…10		2.5…16 2.5…10	2.5…35 2.5…25			2.5…35 2.5…35
	(1) conductor (2) conductors	[mm²] [mm²]	1.5…6 1.5…6				2.5…16 2.5…16		2.5…25 2.5…16	2.5…50 2.5…35			2.5…50 2.5…50
	b max.	[mm]	—				—		—	—
	c max.	[mm]	—				—		—	—
	s max.	[mm]	—				—		—	—
	Æ min.	[mm]	—				—		—	—
Recommended torque	[N•m]		1.5…2.5				2.5…3.5		2.5…3.5	4.5…6
Cross section per UL/CSA	[AWG]		16…10				14…4		14…4	14…1
Recommended torque	[lb•in]		13.3…22				22…31		22…31	40…53
With terminal lug kit			—				—		—	—
Cross section per UL/CSA	[AWG]		—				—		—	—
Recommended torque	[lb•in]		—				—		—	—
With Frame Terminal Block			—				—		—	—
	top opening bottom opening	[mm²] [mm²]	—				—		—	—
	top opening bott. opening	[mm²] [mm²]	—				—		—	—
	b max. s top s bottom	[mm] [mm] [mm]	—				—		—	—
Recommended torque	[N•m]		—				—		—	—
Cross section per UL/CSA top	[AWG]		—				—		—	—
bottom	[AWG]		—				—		—	—
Recommended torque	[lb•in]		—				—		—	—

⋆ Pozidriv No. 2 / Blade No. 3 screw ‡ Pozidriv No. 2 / Blade No. 4 screw § Hexagonal socket screw

			100S-D
			115	115	140	180	210	250	300	420	630	860
Coil Type :	Conventional		X	—	X	X	—	—	—	—	—	—
Coil Type :	Electronic — EI		—	X	X	X	X	X	X	X	X	X
Conductor Cross Sections - Main Contacts Terminal type
	(1) conductor (2) conductors	[mm²] [mm²]	— —	— —			— —				— —	— —
	(1) conductor (2) conductors	[mm²] [mm²]	— —	— —			— —				— —	— —
	b max.	[mm]	20	25			30				52	52
	c max.	[mm]	10	12.5			15				22	22
	s max.	[mm]	5	5			6				2 x 8	2 x 8
	Æ min.	[mm]	6.1	8.3			10.5				13	13
Recommended torque	[Nm]		8…10	10…12			16				68	68
Cross section per UL/CSA	[AWG]		—	—			—				—	—
Recommended torque	[lb-in]		70…90	90…110			130…150				600	600
With terminal lug kit	[lb-in]		100-DL110§	100-DLE110§	100-DL180§		100-DL420§				100-DL630	100-DL860
Cross section per UL/CSA	[AWG]		8…2/0	8…2/0	6…300 MCM		(2x) 4…350 MCM				(2X) 2/0… 500MCM	(4X) 2/0… 500MCM
Recommended torque	[lb-in]		90	90	250		250				400	400
With Frame Terminal Block	[lb-in]		100-DTB110§	100-DTB180§			100-DTB420⋆				—	—
	top opening bottom opening	[mm²] [mm²]	16…35 16…70	16…35 16…95			25…240∆ 25…240				—	—
	top opening bott. opening	[mm²] [mm²]	16…50 16…95	16…50 16…120			25…300 25…300				—	—
	b max. s top s bottom	[mm] [mm] [mm]	16 3…9 3…12	20 3…9 3…14			25 4…20 4…20				—	—
Recommended torque	[Nm]		8…10	10…12			20…25				—	—
Cross section per UL/CSA top	[AWG]		6…1 / 0 AWG	6…1 / 0 AWG			4 AWG…600 MCM				—	—
bottom	[AWG]		6…3 / 0 AWG	6 AWG…250 MCM			4 AWG…600 MCM				—	—
Recommended torque	[lb-in]		70…90	90…110			180…220				—	—

			⋆ Pozidriv No. 2 / Blade No. 3 screw § Hexagonal socket screw ♣ Hexagonal screw ∆ 25…95 mm² with sleeve per DIN 46228

Coil Data

100S/104S-C

Coil Type

Conventional

Electronic — EI

—

Operating Limits

50 Hz, 60 Hz, 50/60 Hz

pick-up

[x Us]

0.85…1.1

0.85….1.1

dropout

[x Us]

0.3…0.6

DC (conventional)

pick-up

[x Us]

0.8…1.1

dropout

[x Us]

0.1…0.6

DC (electronic)

pick-up

[x Us]

0.7…1.25

—

dropout

[x Us]

0.1…0.5

—

Coil Consumption

50 Hz, 60 Hz, 50/60 Hz

pick-up

[VA/W]

70/50

80/60

130/90

200/110

hold-in

[VA/W]

8/2.6

9/3

10/3.2

16/4.5

DC (conventional)

pick-up

[W]

6.5

9.2

10.1

200

hold-in

[W]

6.5

9.2

10.1

4.5

DC (electronic)

pick-up (avg/peak)

[W]

10/22

10.1

—

hold-in

[W]

1.5

10.1

—

Operating Times

closing delay

[ms]

15…30

20…40

opening delay

[ms]

10…60

With RC module

opening delay

[ms]

10…60

DC (conventional)

closing delay

[ms]

40…70

50…80

20…40

opening delay

[ms]

7…15

—

With integ. diode

opening delay

[ms]

14…20

17…23

£ 220V 20…35

With external diode

opening delay

[ms]

70…95

80…125

£ 220V 80…125

DC (electronic)

closing delay

[ms]

20…40

—

opening delay

[ms]

20…40

—

Max. Ripple

± 15%

—

100S-D

115

140/180

110

140

180

210

250

300

420

630

860

Coil Type

Conventional

—

Electronic — EI

—

Operating Limits

50 Hz, 60 Hz, 50/60 Hz

pick-up

[x Us]

0.85…1.1

0.8…1.1

dropout

[x Us]

0.3…0.6

0.3…0.5

0.3…0.8

DC control

pick-up

[x Us]

0.85…1.1

dropout

[x Us]

0.3…0.6

0.3…0.5

0.3…0.8

Coil Consumption

50 Hz, 60 Hz, 50/60 Hz

pick-up

[VA/W]

650/310

380/240⋆

490/270⋆

1915/1720⋆

hold-in

[VA/W]

50/10

13/6

18/7

33/30

DC control

pick-up

[W]

540

265⋆

340⋆

1980⋆

hold-in

[W]

Operating Times

closing delay

[ms]

20…47

20…45

60…100

opening delay

[ms]

6…12

25…110

70…145

With RC module

opening delay

[ms]

9…18

—

closing delay

[ms]

27…47

25…50

60…100

opening delay

[ms]

12…20

35…110

70…145

With integrated diode

opening delay

[ms]

12…20

—

With external diode

opening delay

[ms]

—

⋆ Electronic coil drives are designed to minimize power requirements, but this control may exhibit a higher inrush (540 W, < 10 ms) when energizing. This must be taken into account for the proper sizing of supply devices, all-or-nothing relays and cross-sections of coil supply lines. Please contact your local Rockwell Automation sales office or Allen-Bradley distributor for detailed information.

Bulletin 100S-C/104S-C Approximate Dimensions

Bulletin 100S-C/104S-C Contactors and Accessories

Approximate dimensions are shown in millimeters (inches) and not intended for manufacturing purposes.

Mounting
Position

AC contactors and DC contactors with electronic coils

DC contactors

AC Contactors and DC Contactors with Electronic Coils

Cat. No.	a	b	c	c1	c2	Æd	d1	d2
100S-C09…100S-C23	45 (1-25/32)	81 (3-3/16)	119.5 (4-3/4)	114.5 (4-43/64)	6 (15/64)	2-4.5 (2-3/16)	60 (2-23/64)	35 (1-3/8)
100S-C30, 100S-C37	45 (1-25/32)	81 (3-3/16)	136.5 (5-37/64)	131.6 (5-11/32)	6.5 (1/4)	2-4.5 (2-3/16)	60 (2-23/64)	35 (1-3/8)
100S-C43	54 (2-1/8)	81 (3-3/16)	139.5 (5-11/16)	134.6 (5-29/64)	6.5 (1/4)	2-4.5 (2-3/16)	60 (2-23/64)	45 (1-25/32)
100S-C60…100S-C97	72 (2-53/64)	122 (4-51/64)	156 (6-11/32)	150.5 (6-1/8)	8.5 (21/64)	4-5.4 (4-7/32)	100 (3-15/16)	55 (2-11/64)

DC Contactors

Cat. No.	a	b	c	c1	c2	Æd	d1	d2
100S-C09Z...100S-C16Z	45 (1-25/32)	81 (3-3/16)	145.5 (5-49/64)	140.5 (5-37/64)	6 (15/64)	2-4.5 (2-3/16)	60 (2-23/64)	35 (1-3/8)
100S-C23Z	45 (1-25/32)	81 (3-3/16)	162.5 (6-7/16)	158 (6-1/4)	6 (15/64)	2-4.5 (2 -3/16)	60 (2-23/64)	35 (1-3/8)
100S-C30Z...100S-C37Z	45 (1-25/32)	81 (3-3/16)	180.5 (7-5/32)	175.5 (6-61/64)	6.5 (1/4)	2-4.5 (2-3/16)	60 (2-23/64)	35 (1-3/8)
100S-C43Z	54 (2-1/8)	81 (3-3/16)	183.5 (7-17/64)	179 (7-3/32)	6.5 (1/4)	2-4.5 (2-3/16)	60 (2-23/64)	45 (1-25/32)
100S-C60D...100S-C97D	72 (2-53/64)	122 (4-51/64)	156 (6-11/32)	150.5 (6-1/8)	8.5 (21/64)	4-5.4 (4-7/32)	100 (3-15/16)	55 (2-11/64)

Accessories

Contactors with		mm	(inches)
Auxiliary contact block for side mounting	1- or 2-pole	a + 9	(a + 23/64)
Electronic Timing Module	on coil terminal side	b + 24	(b + 15/16)
Mechanical Interlock	on side of contactor	a + 9	(a + 23/64)
Interface Module	on coil terminal side	b + 9	(b + 23/64)
Surge Suppressor	on coil terminal side	b + 3	(b + 1/8)
Labeling with ⋆	label sheet marking tag sheet with clear cover marking tag adapter for System V4 / V5 marking tag adapter for System Bul. 1492W	+ 0 + 0 + 5.5 + 5.5	(+ 0) (+ 0) (+ 7/32) (+ 7/32)