Contactors and Control Relays

Catalogs > Safety Products Catalog > Power > Contactors and Control Relays > Bulletin 100S-C/104S-C Safety Contactors

Bulletin 100S-C/104S-C Safety Contactors

Introduction Standards Compliance and Certifications Product Selection Bulletin 100S-C/104S-C Accessories Specifications Bulletin 100S-C/104S-C Approximate Dimensions
Bulletin 100S-C/104S-C Accessories

Control Modules (For 100S-C09…C97 contactors)

  Description Connection Diagrams For Use With Cat. No.
Click to enlarge - 100-C_104-C-87-1 Pneumatic Timing Modules
  • Pneumatic timing element contacts switch after the delay time. The contacts on the main control relay continue to operate without delay.
    •      		On-Delay  
    0.3…30 s Range     		Click to enlarge - 100-C_104-C-87-2 100-C or 700-CF with AC coils or DC electronic coils   
    100-FPTA30
    1.8…180 s Range 100-FPTA180
    Off-Delay  
    0.3…30 s Range     		Click to enlarge - 100-C_104-C-87-3 100-C all, 700-CF all   
    100-FPTB30
    1.8…180 s Range 100-FPTB180
    Click to enlarge - 100-ETA3 L_gs- Electronic Timing Modules — On-Delay
    Delay of the contactor or control relay solenoid.
    The contactor or control relay is energized at the end of the delay time.         		On-Delay  
    1…30 s Range     		Click to enlarge - 100-C_104-C-87-5 100-C or 700-CF with 24…48V DC coils   
    100-ETA3
    1…30 s Range 100-ETA30
    10…180 s Range 100-ETA180
      
    110…240V, 50/60 Hz
    110…250V DC         		 
    On-Delay  
    0.1…3 s Range     		Click to enlarge - 100-C_104-C-87-6 100-C or 700-CF with 24…48V DC coils   
    100-ETAZJ3
    1…30 s Range 100-ETAZJ30
    10…180 s Range 100-ETAZJ180
      
    24…48V DC     		 
    Click to enlarge - 100-ETB3 L_gs Electronic Timing Modules — Off-Delay
    Delay of the contactor or control relay solenoid.
    After interruption of the control signal, the contactor or control relay is deenergized at the end of the delay time.         		Off-Delay  
    0.3…3 s Range     		Click to enlarge - 100-C_104-C-87-8 100-C09…C37 or 700-CF with 24V 50/60 Hz coils   
    100-ETBKJ3
    1…30 s Range 100-ETBKJ30
    10…180 s Range 100-ETBKJ180
      
    24V, 50/60 Hz     		 
    Off-Delay  
    0.3…3 s Range     		100-C or 700-CF with 110…240V 50/60 Hz coils   
    100-ETB3
    1…30 s Range 100-ETB30
    10…180 s Range 100-ETB180
      
    110…240V, 50/60 Hz     		 
    Click to enlarge - 100-C_104-C-87-9 Electronic Timing Modules
  • Delay of the contactor solenoid. Contactor K 3 (Y) is de-energized (off) and K 2 (D) is energized (on) after the end of the set Y end time. (Switching delay at 50 ms.)

  • Continuous adjustment range

  • High repeat accuracy
    •      		Transition Time Y Contactor
    1…30 s Range      

    110…240V, 50/60 Hz     		Click to enlarge - 100-C_104-C-87-10 100-C with 110…240V, 50/60 Hz coils 100-ETY30
    Click to enlarge - 100-C_104-C-87-11 Mechanical Interlocks
  • For interlocking of two contactors.

  • Common interlock for all Bul. 100-C contactor sizes

  • Interlocking of different sizes possible

  • Mechanical and electrical interlocking possible in one module by means of integrated auxiliary contacts

  • 9 mm dovetail connector included
    •      		Mechanical only,
    without auxiliary contacts         		Click to enlarge - 100-C_104-C-87-12 100-C (except 100-C40, -C90) 100-MCA00
    Mechanical/ electrical interlock with 2 N.C. auxiliary contacts Click to enlarge - 100-C_104-C-87-13 100-C (except 100-C40, -C90) 100-MCA02
    Click to enlarge - 100-C_104-C-87-15 Mechanical Latch
  • Following contactor latching, the contactor coil is immediately de-energized (off) by the N.C. auxiliary contact (65-66).

  • Electrical or manual release

  • 1 N.O. + 1 N.C. auxiliary contacts

  • Suitable for all Bul. 100-C contactor sizes, 9…97 A
    •      		Maximum command duration 0.03…10 s Click to enlarge - 100-C_104-C-87-14 100-C with AC or 24V DC electronic coils (except 100-C90) 100-FL11Ä
      
    Package Quantity = 1

    Ä Coil Voltage Code

    The cat. no. as listed is incomplete. Select a voltage suffix code from the table below to complete the Cat. No. Example: 120V, 60 Hz:
    Cat. No. 100-FL11Ä becomes Cat. No. 100-FL11D.

    [V]⋆  24V 48V 100V 110V 120V 230-240V 240V 277V 380-400V 400-415V 440V 480V
    AC, 50 Hz K Y KP D — VA T — N G B —
    AC, 60 Hz J — — — D — A T — — N B
      
    ⋆ For special voltages, please contact your local Rockwell Automation sales office or Allen-Bradley distributor.

    Control Modules (For 100S-C09…C97 contactors), Continued

    Click to enlarge - 100-C_104-C-88-1 Description Voltage Range Connection Diagrams For Use With Cat. No.
    DC Interface (Electronic)
  • Interface between the DC control signal (PLC) and the AC operating mechanism of the contactor.

  • Requires no additional surge suppression on the relay coils
    •      		Input: 12V DC
    Output: 110…240V AC         		Click to enlarge - 100-C_104-C-88-2 100-C with AC coils 110…240V AC 100-JE12
    Input: 18…30V DC
    Output: 110…240V AC         		100-JE
    Input: 48V DC
    Output: 110…240V AC         		100-JE48
    Click to enlarge - 100-C_104-C-88-3 Surge Suppressors
  • For limitation of coil switching transients.

  • Plug-in, coil mounted.

  • Suitable for 100-C contactor sizes, 9…97 A.

  • RC, varistor, and diode versions.
    •      		RC Module
    AC operating mechanism         		24…48V AC, 50/60 Hz Click to enlarge - 100D-92-2 100-C with AC coils 100-FSC48
    110…280V AC, 50/60 Hz 100-FSC280
    380…480V AC, 50/60 Hz 100-FSC480
    Varistor Module
    AC/DC operating mechanism         		12…55V AC/ 12…77V DC Click to enlarge - 100-C_104-C-88-5 100-C with AC coils or 100-C09…-C43 with DC coils 100-FSV55
    56…136V AC/ 78…180V DC 100-C with AC coils or 100-C09…-C43 with DC coils 100-FSV136
    137…277V AC/ 181…350V DC 100-C with AC coils or 100-C09…-C43 with DC coils 100-FSV277
    278…575V AC 100-C with AC coils or 100-C09…-C43 with DC coils 100-FSV575
    Diode Module
    DC operating mechanism         		12…250V DC Click to enlarge - 100-C_104-C-88-6 100-C09…-C43 with DC coils 100-FSD250
      

    Assembly Components (For 100S-C09…C97 contactors)

      Description For Use With Pkg. Quantity⋆  Cat. No.
    Click to enlarge - 100-C_104-C-88-7 Dovetail Connectors
  • For use in contactor and starter assemblies.

  • Single Connector — 0 mm Spacing
    •      		100-C 10 100-S0
    Cat. No. 100-S0 Dovetail Connectors
  • For use in contactor and starter assemblies.

  • Dual Connector — 9 mm Spacing
    •      		100-S9
    Click to enlarge - 100-C_104-C-88-8 Protective Covers
  • Provides protection against unintended manual operation

  • For contactors and front-mounted auxiliary contacts, pneumatic timers, and latches
    •      		100-C all 1 100-SCCA
    Cat. No. 100-SCCA
    Click to enlarge - 100-C_104-C-88-9 100-FA, -FB, -FC, -FP, -FL; 10 100-SCFA
    Cat. No. 100-SCFA
    Click to enlarge - 100-C_104-C-88-10 Reversing Power Wiring Kits
  • For reversing connection with a solid-state or thermal overload relay
    •      		100-C09…C23 1 105-PW23
    100-C30…C37 105-PW37
    100-C43 105-PW43
    Cat. No. 105-PW23 100-C60…C97 105-PW85
    Click to enlarge - 100-C_104-C-88-11 DIN (#3) symmetrical hat rail
    35 x 7.5 x 1 m         		100-C 10 199-DR1
      
    ⋆ Must be ordered in multiples of package quantities.

    Marking Systems (For 100S-C09…C97 contactors)

      Description Pkg. Qty.⋆  Cat. No.
    Click to enlarge - 100-C_104-C-89-2 Label Sheet
    105 self-adhesive paper labels each, 6 x 17 mm         		10 100-FMS
    Click to enlarge - 100-C_104-C-89-3 Marking Tag Sheet
    160 perforated paper labels each, 6 x 17 mm, to be used with a transparent cover         		10 100-FMP
    Transparent Cover
    To be used with marking tag sheets         		100 100-FMC
    Click to enlarge - 100-FMA1 Marking Tag Adapters
    To be used with marking tag: System V4/V5         		100 100-FMA1
    Marking Tag Adapters
    To be used with marking tag: System 1492 W         		100 100-FMA2
      
    ⋆ Must be ordered in multiples of package quantities.

    Terminal Kits (For 100S-C09…C97 contactors)

      Description Max. Current Ratings and Wire Sizes Pkg. Qty.⋆  Cat. No.
    Click to enlarge - 100-C_104-C-90-1 Stab Connector Kit
    Dual stab (0.250 in.) for 100-C coil terminals
    For 100-C09…C97 contactors         		20 199-SC2
    Click to enlarge - 100-C_104-C-90-2 Stab Connector Kit
    Dual stab (0.250 in.) for 100-C power terminals
    For 100-C09…C23 contactors         		100 199-SC10
    Click to enlarge - 100_CTN23 3-Pole Terminal Lug Kit
    For Cat. No. 100-C09…C23 (Line side)         		IEC @ 40 °C
    IEC @ 40 °C
    UL/CSA (Encl.)     		45 A (4…16 mm2‡ , fine stranded w/ferrule)
    45 A (4…25 mm2, coarse stranded/solid)
    40 A (#10…4 AWG, stranded/solid)     		1 100-CTN23
    3-Pole Terminal Lug Kit
    For Cat. No. 100-C09…C23 (Load side)         		IEC @ 40 °C
    IEC @ 40 °C
    UL/CSA (Encl.)     		45 A (4…16 mm2‡ , fine stranded w/ferrule)
    45 A (4…25 mm2, coarse stranded/solid)
    40 A (#10…4 AWG, stranded/solid)     		1 100-CTL23
    3-Pole Terminal Lug Kit
    For Cat. No. 100-C30…C37 (Line and load side)         		IEC @ 40 °C
    IEC @ 40 °C
    UL/CSA (Encl.)     		60 A (4…16 mm2‡ , fine stranded w/ferrule)
    60 A (4…25 mm2, coarse stranded/solid)
    55 A (#10…4 AWG, stranded/solid)     		1 100-CT37
    Click to enlarge - 100_CT43 1-Pole Terminal Lug Kit
    For Cat. No. 100-C43         		IEC @ 40 °C
    IEC @ 40 °C
    UL/CSA (Encl.)     		90 A (6…35 mm2, fine stranded w/ferrule)
    90 A (6…50 mm2, coarse stranded/solid)
    75 A (#8…2 AWG, stranded/solid)     		3 100-CT43
    1-Pole Terminal Lug Kit
    For Cat. No. 100-C60…C97         		IEC @ 40 °C
    IEC @ 40 °C
    UL/CSA (Encl.)     		130 A (10…70 mm2, fine stranded w/ferrule)
    130 A (10…95 mm2, coarse stranded/solid)
    130 A (#8…2/0 AWG, stranded/solid)     		3 100-CT85
    Click to enlarge - 100CP23 3-Pole Paralleling Kit
    For Cat. No. 100-C09…C23         		IEC @ 40 °C
    IEC @ 40 °C
    UL/CSA (Encl.)     		100 A (35…70 mm2, fine stranded w/ferrule)
    100 A (35…95 mm2, coarse stranded/solid)
    100 A (#0…2/0 AWG, stranded/solid)     		2 100-CP23
    3-Pole Paralleling Kit
    For Cat. No. 100-C30…C37         		IEC @ 40 °C
    IEC @ 40 °C
    UL/CSA (Encl.)     		150 A (35…70 mm2, fine stranded w/ferrule)
    150 A (35…95 mm2, coarse stranded/solid)
    150 A (#0…2/0 AWG, stranded/solid)     		2 100-CP37
      
    ⋆ Must be ordered in package quantities.
    ‡ 16 mm2 max. according to IEC 60947; actual max. 25 mm2.