Contactors and Control Relays

Catalogs > Safety Products Catalog > Power > Contactors and Control Relays > Bulletin 100S-D IEC Safety Contactors

Bulletin 100S-D IEC Safety Contactors

Product Selection

3-Pole AC-Operated Contactors

Ie [A]		Switching of 3-phase motors AC-2, AC-3										Coil Type	Auxiliary contacts		Cat. No.♦
60 °C	40 °C	kW (50 Hz)⋆						Hp (60 Hz)					N.O.	N.C.‡
AC-3	AC-1	230V	400V	415V	500V	690V	1000V	200V	230V	460V	575V
115	250	37	63	66/75♣	80	111	63	40	40	75	100	Conventional	2	2	100S-D115Ä22BC
115	250	37	63	66/75♣	80	111	63	40	40	75	100	Electronic	2	2	100S-D115Ä22BC
140	250	45	78	82/90♣	80/100§	110/132§	75	40	50	100	125	Conventional	2	2	100S-D140Ä22BC
140	250	45	78	82/90♣	80/100§	110/132§	75	40	50	100	125	Electronic	2	2	100S-D140Ä22BC
180	250	55	101	100♣	90/125§	132/160§	90	50	60	150	150	Conventional	2	2	100S-D180Ä22BC
180	250	55	101	100♣	90/125§	132/160§	90	50	60	150	150	Electronic	2	2	100S-D180Ä22BC
210	350	63	118	110♣	205	200	110	60	75	150	200	Electronic	2	2	100S-D210Ä22BC
250	350	80	140	150♣	250	250	133	75	100	200	250	Electronic	2	2	100S-D250Ä22BC
300	450	90	170	160♣	290	300	160	100	125	250	300	Electronic	2	2	100S-D300Ä22BC
420	540	132	238	250	420	425	220	150	175	350	400	Electronic	2	2	100S-D420Ä22BC
630	800	200	355	355	500	500	—	200	250	500	600	Electronic	2	2	100S-D630Ä22BC
860	1000	250	500	500	500	600	—	250	300	600	700	Electronic	2	2	100S-D860Ä22BC
⋆ Preferred values according to IEC 60072-1. ‡ The N.C. contacts meet IEC 60947-4 Annex F requirements for mirror contact performance. The N.C. mirror contacts are wired in series or parallel and must be used as monitoring contacts with feedback to the safety circuit. § Higher kW rating only applies to contactors with electronic coil. ♦ If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the cat. no. Example: Cat. No. 100S-D95Ä22BC becomes Cat. No. 100S-D95Ä22C.
♣ 415V: Values for AC-3 and AC-4 lifespan -25%

Ä Coil Voltage Codes: see

3-Pole DC-Operated Contactors

Ie [A]		Switching of 3-phase motors AC-2, AC-3										Auxiliary contacts		Coil Type	Conventional Coil Cat. No.‡	Electronic Coil Cat. No.♦
60 °C	40 °C	kW (50 Hz) ⋆						Hp (60 Hz)				N.O.	N.C. ‡  ⋆
AC-3	AC-1	230V	400V	415V	500V	690V	1000V	200V	230V	460V	575V
115	250	37	63	75	80	111	63	40	40	75	100	3	2/1L	Conventional	100S-D115Ä33LC§	‡	100S-D115Ä22BC
140	250	45	78	75	80/100♣	110/132♣	75	40	50	100	125	3	2/1L	Conventional	100S-D140Ä33LC§	‡	100S-D140Ä22BC
180	250	55	101	100	90/125♣	132/160♣	90	50	60	150	150	3	2/1L	Conventional	100S-D180Ä33LC§	‡	100S-D180Ä22BC
210	350	63	118	110	205	200	110	60	75	150	200	2	2	Electronic	—	100S-D210Ä22BC
250	350	80	140	150	250	250	133	75	100	200	250	2	2	Electronic	—	100S-D250Ä22BC
300	450	90	170	160	290	300	160	100	125	250	300	2	2	Electronic	—	100S-D300Ä22BC
420	540	132	238	250	420	425	220	150	175	350	400	2	2	Electronic	—	100S-D420Ä22BC
630	800	200	355	355	500	500	—	200	250	500	600	2	2	Electronic	—	100S-D630Ä22BC
860	1000	250	500	500	500	600	—	250	300	600	700	2	2	Electronic	—	100S-D860Ä22BC
⋆ Preferred values according to IEC 60072-1. ‡ The N.C. contacts meet IEC 60947-4 Annex F requirements for mirror contact performance. The N.C. mirror contacts are wired in series or parallel and must be used as monitoring contacts with feedback to the safety circuit. § For conventional DC coil only. The pickup winding must be interconnected with the N.C. late-breaking auxiliary contacts. ♣ Higher kW rating only applies to contactors with electronic coil. ♦ If standard cross-stamped front-mount auxiliary contacts are required, remove the letter "B" before the letter "C" in the Cat. No. Example: Cat. No. 100S-D95Ä22BC becomes Cat. No. 100S-D95Ä22C.

Ä Coil Voltage Codes

Conventional Coil	[V]	24	48	100	110	120	200	208	220 …230	230	240	277	380 …400	415	440	480	500	550	600
100S-D115…100S-D180	AC, 50 Hz	K	Y	—	D	—	—	—	A	—	T	—	N	B	G	—	M	C	—
	AC, 60 Hz	J	X	—	—	D	—	H	—	—	A	T	—	—	N	B	—	—	C
100S-D115	AC, 50/60 Hz	—	—	KP	KN	—	KG	—	KL	KF	KA	KT	—	—	—	—	—	—	—

Electronic Coil w/ PLC Interface♣

[V]

24

42…64

100

110… 130

200

208… 277

200… 220

230… 250

277

380… 415

380… 440

440… 480

380… 500

500

100S-D115…100S-D300

AC, 50/60 Hz

EJ∆

EY

EP

ED

EG

EA

—

—

—

—

VN

—

EN

—

100S-D420

AC, 50/60 Hz

—

—

EP

ED

EG

EA

—

—

—

—

—

—

EN

—

100S-D630…100S-D860

AC, 50/60 Hz

—

—

EP

ED

EG

—

EG

EA

ET

EN

—

EB

—

EM

Conventional Coil	[V]	24	48	110	125	220	250
100S-D115…100S-D180 §	DC	ZJ	ZY	ZD	ZS	ZA	ZT

Electronic Coil w/ EI Interface ∆	[V]	24	48…72	110…130	200…255
100S-D115…100S-D300	DC	EZJ	EZY	EZD	EZA
100S-D420	DC	—	—	EZD	EZA
100S-D630…860	DC	—	—	ED	EA

∆ Signal voltage of the cat. no. 100S-S… electronic interface U_e: 24V DC/I_e: 15 mA
Pick-up voltage: 13.0V DC…30.2V DC
Drop-out voltage: -3.0V DC…+5.0V DC