Allen-Bradley Home

Protection Systems

General Resources
Product Directory > Condition Monitoring > Protection Systems > XM-122 gSE Vibration Module

XM-122 gSE Vibration Module

Introduction Communication Inputs Tachometer Outputs Indicators
Single Conditioning Complex Data Measured Parameters Data Buffers Alarms Relays
Non-Volatile Configuration Power Approvals Environmental Physical Ordering Instructions

Communication


DeviceNet:

  • Standard DeviceNet protocol for all functions
    NOTE: The XM-122 uses only the DeviceNet protocol, not power. Module power is provided independently.
  • Available Electronic Data Sheet (EDS) file provides support by most DeviceNet compliant systems
  • Baud rate automatically set by bus master to 125kb, 250kb or 500kb
  • Configurable I/O Poll Response helps optimize space utilization within users scanner input tables
    • Selectable Poll Response Assembly
    • Selectable Poll Response Size (bytes)


Side Connector:

All XM measurement and relay modules include side connectors that allow interconnecting adjacent modules thereby simplifying the external wiring requirements. The Interconnect provides primary power, DeviceNet communication and the circuits necessary to support expansion modules such as the XM-441 Expansion Relay module.


Serial:¬ 

  • RS-232 via mini-connector or terminal block
  • Baud rate auto baud to 19200 or 57600


¬ Local configuration via Serial Utility Program