Relays
Number:
- Single on-board relay, two sets of contacts–DPDT (2 Form C)
- Four additional relays when linked to an XM-441 Expansion Relay module, or:
- Four virtual relays whose status can be used by remote Control Systems
Onboard Relay Rating:
- Max. Voltage = 120 Vdc, 125 Vac
- Max. Current = 3.5 A ¬
- Min. Current = 0
- Max. Power = 60 W, 62.5 VA
- UL Rating: 120 Vac @ 0.5 Amps resistive; 110 Vdc @ 0.3 Amps resistive; 30 Vdc @ 1.0 Amps resistive
¬ Max current is up to 40°C, then derates to 2A at 65°C. For Expansion Relay Rating refer to XM441 Technical data sheet ENMON-TD441A-EN-P
Failsafe:
- Normally energized (failsafe), or
- Normally de-energized (non-fail-safe)
Latching:
- Latching, or
- Non-latching
Time Delay:
0 to 65 seconds in 10 millisecond increments
Voting Logic:
Single or paired "And" or "Or" logic applied to any alarms
Reset:
- Local reset switch on top of module
- Remote reset switch wired to terminal base
- Digital reset command via serial or DeviceNet interface
Activation On:
- Alarm Status
- Transducer Fault
- Module Fault
- Tachometer Fault
|
