|
 |
| XM-500 Ethernet Gateway Module |
500 Ethernet Gateway Module
The XM® series from Rockwell Automation is the world's first machine monitoring and protection system designed as a distributed network of modules deployed on an open standard industrial bus.
The XM-500 Ethernet/IP Gateway Module provides a powerful bridge between an XM DeviceNet network and Ethernet. The Gateway provides complete DeviceNet Master functionality and support for a fully populated DeviceNet network with up to 63 devices. On the Ethernet side the XM-500 offers a standard TCP/IP interface and support for both Ethernet/IP and Modbus/TCP protocols.
The XM-500 is designed specifically for use with the XM Series of modules. XM Series modules reside on and communicate over a standard DeviceNet network. By applying an XM-500 Ethernet/IP Gateway Module users can harvest data from the XM system and transmit it to host PC applications as well as Ethernet/IP or Modbus/TCP linked controllers. When configured as a scanner, an impressive 8 kB of input table space is available to insure that all of the data offered by the XM modules can be scanned.
The module supports Explicit Messaging of DeviceNet devices from Ethernet hosts, seamless Control and Information Protocol (CIP) integration for support of other NetLinx™ products, and is fully supported by Rockwell Software's RSLinx software. The module can also provide Automatic Device Replacement (ADR) functionality to connected DeviceNet devices.
Specifications
- Communications
- Indicators
- Software
- Non-Volatile Configuration
- Power
- Environmental
- Physical
- Ordering Instructions
Communication
DeviceNet:
- Standard DeviceNet protocol for all functions
- Available Electronic Data Sheet (EDS) file provides support for most DeviceNet compliant systems
- Baud rate: 125kb, 250kb or 500 kb
- Standard DeviceNet Master Scanner functionality supporting up to 63 XM slave devices
- Supports Explicit Messaging, Polling, Change of State (COS), and Bit Strobe I/O messaging
- Supports Automatic Device Replacement (ADR), including:
- Automatic Address Recovery
- Automatic Configuration Recovery
- Automatic Address Recovery
- 65k bytes of ADR space
- 8k bytes of Input table space (no Output table)
- Event logging captures time stamped records of changes in alarm and relay status, and changes to module configurations
Ethernet:
- 10/100 BaseT Auto switching
- UDP and TCP/IP protocol stack
- IT protocols: SMTP, FTP and HTTP
- DHCP/BootP and ARP support for IP address configuration
- Supports control systems protocols: Ethernet/IP and Modbus/TCP
Simultaneous Connections:
- 64 for TCP and Ethernet/IP
- 8 for Modbus/TCP
Indicators
7 LEDs:
- Module Status – red/green
- Gateway Status – red/orange/green
- DeviceNet Module Status – red/green
- DeviceNet Network Status – red/green
- Ethernet Activity – green
- Ethernet Link – green
- Ethernet Network Status – red/green
Software
Ethernet/IP protocol configuration software:
- RSLinx™ version 2.40 or later
- RSNetWorx for DeviceNet version 3.00 or later
- RSMACC Enterprise Online
- XM Emonitor Gateway
Non-Volatile Configuration
A copy of the module configuration is retained in nonvolatile memory from where it is read upon power up.
Power
Module:
7 - 32Vdc
Consumption:
130 - 140mA @ 24Vdc
Heat Production:
Max: 7 Watts (24 BTU/hr); Typical: 4 Watts (14 BTU/hr)
Environmental
Operating Temperature:
0 to +70°C (32 to 158°F)
Storage Temperature:
-25 to +85°C (-13 to 185°F)
Relative Humidity:
95% non-condensing
Physical
Dimensions:
- Height: 2.08in (52.7mm)
- Width: 4.3in (109.2mm)
- Depth: 4.96in (126mm), (+connectors 0.21 in / 5.2 mm)
Ordering Instructions
| Catalog Number | Description |
| 1440-GWEN2DN | XM-500 Ethernet Gateway |