• One XM Measurement Module:
  
  • XM-120 Standard Dynamic Measurement Module
    
  • XM-121 Low Frequency Dynamic Measurement Module
    
  • XM-122 gSE Vibration Module
    
• XM-441 Expansion Relay Module (Three relays, Transducer Fault, Warning & Trip, are available for field use.
  
• Front panel display of:
  
  • Two digital meters
    
  • Buffered outputs for channels 1, 2 and the tachometer
    
  • LED status indication for:
    
  • Module Fault
    
  • Transducer Fault
    
  • Warning
    
  • Trip
    
• Front panel relay reset control
  
• DC Power Supply
  

As a replacement monitor for retiring IRD 5802 monitors the XM-720 Machine Monitor offers the simplest replacement strategy:

• Common cutout dimensions. The XM-720 is 1.125 in (2.86 cm) deeper than the IRD 5802.
  
• Common functionality. Out of the box the XM-720 offers each of the key display and protection functions as the IRD 5802 vibration monitor.
  
• All wiring common to the IRD 5802 has been brought to a simple easily accessed removable terminal mounted on the back panel.
  

• Communications
  
• Inputs
  
• Outputs
  
• Indicators
  
• Relays
  
• Power
  
• Approvals
  
• Environmental
  
• Physical
  
• Ordering Information
  

• Serial configuration
  
• Remote system access is available via the DeviceNet interface
  

• 2 channels for standard ICP type accelerometers
  
• One channel for ±25V (50V max. peak to peak) or 1 to 50,000 events per revolution Tachometer
  

• Two 4-20mA isolated outputs (250 ohm max load)
  
• Three Buffered Outputs
  
  • 2 active buffers, one per channel
    
  • 1 resistive buffer for tachometer
    

• Four Front Panel LEDs (module; tranducer; warning; and trip status)
  
• Two Digital Meters
  
• Resolution: ±1.66% of full-scale
  
• LEDs: 31 behind red tint filter
  
• Removable black bezel w/white faceplate and black lettering
  
• Size: 1/16 DIN; 9.6 cm / 3.8 in. (H) x 2.4 cm / 0.95 in. (W)
  
• Scale: 0-100%; Major divisions: 0, 25, 50, 75, 100%; Minor divisions: 5%
  

• Three relays pre-wired and available via back panel terminations for module; transducer tachometer fault (fail-safe); warning; and trip
  
• Relay Rating
  
  • 250VAC @ 3 Amps resistive
    
  • 150VDC @ 1.6 Amps resistive
    

• Volts: 85 – 264 VAC
  
• Amps: 0.21 – 0.07 (maximum)
  
• Watts: 19 (maximum)
  

• Operating Temperature: 0 to +60°C (32 to 140°F)
  
• Storage Temperature: -20 to +70ºC (-4 to 158°F)
  
• Relative Humidity: 5% to 95% non-condensing
  

• Dimensions
  
  • Cutout
    
  • Height: 7.25 in (18.42 cm)
    
  • Width: 5.44 in (13.82 cm)
    
  • Depth: 12.49 in (31.72 cm)
    
  • Faceplate
    
  • Height: 8.75 in (22.23 cm)
    
  • Width: 5.66 in (14.36 cm)
    
  • Weight
    
  • 6 Lbs / 2.7 kg