Mounting System and Starter
Panel Mounting Solutions
The Panel Mounting
Modules allow Allen-Bradley to provide a comprehensive range
of IEC Loadfeeder solutions up to 90 A.
- Available as factory assembled Bulletin 103 Non-Reversing
and Bulletin 107 Reversing starters up to 90 A with
AC or DC coils
- Two Component Starters consisting of 140M Motor
Protection Circuit Breakers and 100C Contactors
- Three Component Starters consisting of 140M Motor
Protection Circuit Breakers and 100C Contactors and
193 Overload Relays
- Control Plug is optional for control connections.
- Consists of a keyed, pull-apart terminal block to
reduce wiring errors and labor during maintenance
- Rigid mounting can be achieved via two methods
- Hat Rails (DIN Rails)
- (2) 35 mm Hat Rails
- (1) 75 mm Hat Rail
- Screws (4 locations are provided)
|
|
Busbar Feeder Solutions
The highlight of the Busbar Feeder Solutions
for the Bulletin 141A MCS Mounting system is the introduction
of pre-configured Bulletin 140U Molded Case Circuit Breakers
that mount directly onto the Busbar. Traditional Feeder
Solutions consisting of (3) loose terminals are also enhanced
with the new Feeder Modules which are Modules consisting
of (3) self-contained terminals.
- Circuit Breaker Modules provide the electrical feed
and the short circuit protection for the Busbar
- Solutions with Circuit Breaker Modules up to 400
A
- Solutions with Single Terminals up to 70 mm2 (2/0
AWG) wire
- Solutions with Supply Modules up to 300 mm2 (500 MCM)
wire
|
|
|
|
 |
|
|
