|
Overload Relays
E3 Relay Accessories
The E3 Programming and Control Terminal (PCT) puts the convenience of commissioning, programming and monitoring of the E3 overload relay right in your hands. It is equally useful in DeviceNet™ networks as well as point-to-point applications. For added flexibility, the door mount bezel kit accessory allows the PCT to be mounted in a fixed location, such as on the outside of a control cabinet. While the PCT has been optimized for use with the E3 overload relay, it can also be used to commission other DeviceNet products. Features Easy Navigation/Programming — The PCT’s top row of keys provides the five familiar navigation keys (ESC, SEL,  ,  ,
and  ) found on other Allen-Bradley motor control products. The
PCT menu structure is straightforward and intuitive so that programming time can
be minimized. Numerical keys increase ease of use.
Control — The green and red control keys allow the PCT to operate the output relays of an E3 overload relay operating in a stand-alone application. The reset key is provided to clear E3 overload relay trips. Password Protection — The PCT allows the installer to set password protection to control access to the programming menus. When logged out, the PCT will allow the monitoring of parameter values through the Display mode.EEPROM Mode — Through the EEPROM mode, the PCT allows for the uploading, downloading and file storage of device configurations. This feature can reduce programming time in installations with multiple E3 overload relays requiring similar configuration. Auto Connect Mode — The Auto Connect mode provides an automatic method for the PCT to establish a communication connection with a target device on power up. Additionally, the PCT is factory set to auto connect to a target device set at node address 63 - typical factory default setting. This allows for establishing an easy out-of-the-box communication connection. Ordering InformationSpecifications AC Input Interface Module |
|
 |
|
|||||||||||||||||||||||||||||||||||||||
