General Purpose Relays
700-HL Terminal Block Relay 1-Pole and 2-Pole
Rockwell Automation now offers two Terminal Block Relays (TBR) ideally designed for a variety of high-density isolation and interposing applications. The 700-HL serves as an interposing relay between the controller and field devices. It is the first TBR to have cULus (UL listed to UL and CSA Standards), RINA (European) and Lloyds (US) marine certifications. Available in a single pole or 2-pole version, this family of TBRs offers the following features:
Space Savings
- Single-Pole: 6.2 mm wide (SPDT)
- 2-Pole: 14 mm wide
- Up to 80% Panel space savings vs. traditional relays
Easy, Cost-Effective Installation
- Electrical wiring costs can be reduced up to 53% on projects using optional 8 and 20-way jumpers.
- Requires only one wire to connect to a coil, common or contact power distribution terminal through the use of the 8-way jumper wiring system
Optional Spring Clamp Technology
- Reduces installation time and labor costs versus traditional screw terminal sockets
- Superior choice for high vibration applications
Gold Plated Contacts – Optional
- Ensures corrosion will not form on the contact surface over time
- Switches low energy loads reliably as low as 5V, 1mA, 50mW
Exclusive Circuit Design
This is the first product on the market offering a built-in leakage current suppression circuit design as an option (1-Pole only). In applications, where input voltages are greater than 120V, this unique design will shunt up to 2.2mA max leakage current from a TRIAC output, addressing nuisance coil turn-on or contact non-drop-out concerns, for 120V AC/DC and higher.
700-HL Features
- Relay and socket as one part number, assembled at factory
- Standard built-in reverse DC polarity protection ensures DC coil devices are not damaged if improper polarity is connected
- Separation of coil and contact terminals
- Snap in 1492 marker system
- C-UL-US listed relay and socket combinations
- One piece housing construction in terminal area to prevent screwdriver blade from catching on housing seam
- 700-HL Single Pole
- Ith=6A, B300, R300 contact rating
- Ith=2A Solid State Relay
- Sealed contacts
- 700-HL 2-Pole
|
|
 |
|
|
