The Lowest Cost Installed General Purpose Relay

Rockwell Automation has enhanced its line of Terminal Block Relays by offering the Allen-Bradley 700-HL Spring Clamp Terminal Block Relay. This spring clamp technology is a superior choice for vibration applications and will further reduce project installation costs significantly.

The 700-HL is the thinnest per pole interface relay at 6.2mm wide – reducing panel space up to 80% and electrical installation labor 50% to 76%.

Spring Clamp Advantages

• Reduces installation labor time up to 76% versus traditional screw terminal sockets
• Requires only one wire to connect to a terminal through use of the 20-way jumper wiring system
• Eliminates 50% of the power distribution terminal blocks
• Best solution for high vibration applications

Easy as 1...2...3

1. Insert a flat-blade screwdriver into the square opening
2. Insert wire
3. Pull out screwdriver

This design is cULus listed and tested to pass wire pull-out and secureness tests for #24…#14 AWG (0.2mm2 to 2.5mm2) wires.

Specification Overview