|
Single-Loop Electronic Temperature/Process Controllers
USB-Serial Conversion Cable (900-CPOEM1) Software To install and use this software, you must first purchase a 900-CPOEM1 USB-Serial Conversion cable which allows direct (1-to 1) connection from your PC's USB port to the 4-pin serial port of an enhanced 900-TC8 or 900-TC16 controller. No communication option unit is required. The 900-CPOEM1 cable can be used with 900 BuilderLite configuration software to modify individual controller parameters or for parameter upload/download. Please read the installation instructions below to install the 900-CPOEM1 Software: 900-CPOEM1_Installation_Instructions.pdf IMPORTANT: Copy the contents of the ZIP folder to a Temporary location (folder) on your PC hard drive. Then follow the instructions "Cable Configuration to PC and Controller" and "Installing the Driver" (steps 3 through 9) from the 900-CPOEM1 Installation Instructions. To install the 900-CPOEM1Software, please click on the link below: |
|
 |
| ||||||||||||||||||||||||||||||||
