Wiring and Connection Systems
Digital Cables
Rockwell Automation offers three kinds of digital cables:
Pre-Wired:
Bulletin 1492 Pre-wired cables are designed
to minimize control wiring in a panel. Pre-wired cables, when
used with an IFM, replace the point-to-point wiring between
Allen-Bradley programmable controller I/O modules and inidividual
terminal blocks. The pre-wired cables have a removable terminal
block or wiring arm at the PLC end of the cable and a cable
connector on the other end to connect to the IFM. All of the
pre-wired cables use a #22 AWG wire and are 100% tested for
continuity to make a perfect connection every time. The digital
pre-wired cables are offered in four standard lengths of 0.5,
1.0, 2.5 and 5.0 m to fit a variety of applications. |
|
|
| |
|
|
| I/O Ready:
I/O-Ready cables have an I/O Removable
Terminal Block or Wiring Arm factory-wired to one end of
the cable and free connectors on the other end for wiring
into standard terminal blocks or other type of connectors.
I/O-Ready Cable have individual color-coded conductors for
quick wire-to-terminal coordination. The I/O-Ready cables
use #18 AWG conductors for higher current applications or
longer cable runs. The I/O-Ready cables are offered in standard
lengths of 1.0, 2.5, and 5.0 m to fit a variety of applications.
|
|
 |
| |
|
|
| IFM-Ready:
IFM-Ready Cables have a cable connector
that attached to the IFM factory-wired to one end and free
connectors ready to wire to I/O modules or others components
on the other end. IFM-Ready Cables use #22 AWG wire and
have individual color-coded conductors for quick wire-to-terminal
coordination. The digital IFM-Ready Cables are offered in
standard lengths of 1.0, 2.5, and 5.0 m to fit a variety
of applications. Other cable lengths are also available
as build-to-order products. |
|
 |
|
 |
 |
|
|
