Motor Control Centers
NEMA MCCs
CENTERLINE 2100 with IntelliCENTER
DeviceNet Products
E3 Solid-State Overload Relay
Provides on-board DeviceNet and up to four inputs for monitoring the status of the contactor, disconnect switch, and hand-off-auto selector switch. Programmable functions include: overload/underload, phase loss/imbalance, stall, jam, zero sequence ground fault, and PTC thermistor inputs. Information available via the E3 overload relay includes: time-to-trip, time-to-reset, percent thermal capacity utilized, and history of last five trips.
Communication Module with Input Points (2100-GK61)
DeviceNet communication module for intelligent Allen-Bradley products like: AC drives (Bulletins 1305, 1336 PLUS, 1336 PLUSII), SMC Dialog Plus controllers, and SMP-3 overload relays. The module features four input points ideal for monitoring the status of the contactor, disconnect switch, and hand-off-auto selector switch.
The Allen-Bradley Bulletin 2100-GK61 enhanced DeviceNet communication module provides an electronic communication interface between the DeviceNet network and any SCANport product, while providing digital inputs to monitor disconnect auxiliary contacts, hands-off-auto switches or motor starter contacts via DeviceNet. The 2100-GK61 module is panel mounted. Digital inputs can be 230Vac, 115Vac or 24Vdc with the voltage level set via a Dip Switch.
The DeviceNet network is an open, global industry-standard communication network designed to provide an interface through a single cable from a programmable controller directly to smart devices such as sensors, push buttons, motor starters, simple operator interfaces and drives.
The 2100-GK61 module lets you connect your SCANport products to a DeviceNet network. This adapter features the following:
- Flash upgradeability allows for field updates in the event of changes to the adapter's firmware.
- COS (Change of State) capability lets you customize this device's activity on the network by configuring the adapter to report only new data.
- Cyclic operation lets you customize the device's activity on the network by configuring the adapter to report its data at specific intervals.
- Peer I/O capabilities let the adjustable frequency drive's I/O (logic command, reference, logic status, feedback and datalinks) be broadcast to or received from other adjustable frequency drives connected via 1203-GU6, 1336-GM6 or 2100-GK61 adapters
- Polled operation allows you to customize the device's activity on the network to respond only after the scanner sends control data.
- Software configuration lets you configure the adapter using RSNetWorx for DeviceNet.
- Faulted Node Recovery lets you change items, such as node address, of a device even when it is faulted on the network.
- User-configurable fault response provides the ability to customize the adapter's reaction to communication errors.
- Module Status LED's help to diagnose network, module and SCANport product health.
- Four (4) individual digital inputs allow you to monitor and report status of devices such as disconnect auxiliary contacts, hand-off-auto switches, or motor starter contacts. The inputs can be read as part of the I/O stream using a polled, COS or cyclic method. The inputs can also be read using explicit messaging.