Integrated Motion Control

Integrated Motion Control

Servo Motors

F-Series

F-Series motors use a Ferrite magnet to provide nearly four times greater inertia than the H-Series family for matching larger load inertias. Available in two frame sizes, the F-Series motors range in continuous torque capability from 3.5 to 28 Nm (31 to 245 lb-in.) and reach speeds up to 4,000 RPM. The F-Series motors use an optical 2,000-line incremental encoder with a 5,000-line option for superior low-speed performance with the ULTRA Series. Typical applications for the F-Series include web processing, machine tool, textile machinery, and CAM replacements. When you install the optional motor shaft seal, the motor meets the IP65 requirements of the IEC standard.

Features

The F-Series motors have the following features:

• Compact design that is mechanically interchangeable with the H-Series family
• Two frame sizes, six models
• Continuous torque from 3.5 to 28 Nm (31 to 245 lb-in.)
• Speeds up to 4,000 RPM
• Ferrite permanent magnet rotors provide approximately four times greater rotor inertia than the H-Series family for matching larger load inertias
• Internal thermal switch indicates overheating
• Motor-mounted optical encoder included 2,000 quadrature pulses, index pulse, and standard commutation channels for drives
• Water tight MS connections are compatible with standard cable assemblies; in addition, the extruded aluminum housing and environmental connectors provide an IP65 package (with the addition of the optional shaft seal kit) Economical, compact design ready for harsh environments
• Axially-trapped front bearing in a steel insert for long life at high speeds