1. Error code 6 what is it? (Not shown in the 1305 Manual)

1.
Q? Error code 6 what is it (Not shown in the 1305 Manual)
A! The file in the HIM is for a different HP, voltage, or firmware drive then the one its connected to. This is true for all drive platforms that utilize this type of HIM module.
The following table shows all the HIM errors and possible solutions (found in the 1336 PLUSII manual).

Example: If down loading a 3HP file into a 5HP file, you should get an error6. It identifies the difference in HP by comparing the drive types. The only thing that typically needs to be changed is parameter 38 overload current. So pressing Enter will allow the down load to complete.