The Bulletin 1336 FORCE Field Oriented AC Drive is a microprocessor controlled Digital AC Drive with the following features:

• 1 to 650 HP at 0 - 250 HZ constant torque
• Four Quadrant operation available
• High Performance Digital Velocity Loop
• Microprocessor controlled, field oriented current loop
• Simplified programming through the use of a Parameter Table that features data entries in engineering units with English descriptions
• Nonvolatile Parameter Storage
• Extensive diagnostics, including both logic board and power structure tests
• Time stamped nonvolatile Fault/Warning Queue
• Real Time Clock
• Reference Time Stamp
• Run Time Accumulator
• Enclosed Construction
• Multiple Communication Interfaces
• Complete Encoder Interface
• Drive to Drive Link
• SCANport Peripheral Interface

• Speed Regulation to 0.001% of top speed.
• Torque Regulation to ± 5% of rated motor torque.
• Power Loss Ride-Thru capability of two seconds.
• Flying Start: Capability of starting into a spinning motor.
• Torque Linearity 1%
• Overload Capability: 150% for 1 minute, 200% of motor rating for 10 seconds, up to inverter limit.
• Programmable Accel/Decel rates from 0 to 6553 seconds
• Current limit programmable from 200% of rated output current.

• Standard Adapter Board which provides: - 2 Analog Inputs +/-10V - 2 Analog Outputs +/- 10V - One 4-20mA input - One 4-20mA output - 5 or 12 vdc pulse input - +/- 10V reference voltages - At Speed, Run, Fault and Alarm contacts
• PLC Communication Adapter Board which provides: - 4 Analog Inputs +/-10V - 4 Analog Outputs +/- 10V - +/- 10V Reference voltages - RIO/DH? + Communications (2 channels selectable) - Function Blocks
• DriveTools?; PC Windows? based programming software compatible with the 1336 FORCE Drive and also other Allen-Bradley 1336 and 1395 products.
• Dynamic Braking
• AC Motor Contactor

• Programmable Motor Overload Protection (I 2 T) investigated by UL to comply with NEC Article 430.
• Programmable Inverter Overload Protection (IT)
• Overspeed Detection, even when operating as a torque follower.
• Programmable Stall Detection
• Peak output current monitoring to protect against excessive current at the output due to a phase to ground or phase to phase short.
• Ground fault monitoring
• DC Bus Voltage monitoring to protect against under/over voltage conditions.
• Power Structure Heatsink Temperature Monitoring

The following environmental guidelines apply to both the 1336 FORCE Drive and all devices and accessories connected to the Drive.

Ambient Operating Temperature:

• IP00, Open: 0 to 50 degrees C (32 to 122 degrees F).
• IP20, NEMA Type 1 Enclosed: 0 to 40 degrees C (32 to 104 degrees F).
• IP65, NEMA Type 4 Enclosed: 0 to 40 degrees C (32 to 104 degrees F).
• Storage Temperature (all constructions): -40 to 70 degrees C (-40 to 158 degrees F).

Relative Humidity: 5 - 95% non-condensing

Altitude: 1000m (3300 ft) without derating.

Shock: 15g peak for 11ms duration (+ 1.0 ms).

Vibration: 0.006 inches (0.152 mm) displacement. 1G peak.

Input Voltage Rating:

• 200 - 240VAC, Standalone, 3 Phase, +10%, -15% nominal
• 380 - 480VAC, Standalone, 3 Phase, +10%, -15% nominal
• 500 - 600VAC Standalone, 3 Phase, +10%, -15% nominal
• 513 - 621 VDC, Common Bus, +10%, -15% nominal
• 776 VDC, Common Bus, +10%, -15% nominal

Input Power Rating:

• 2 - 134 KVA (230V)
• 2 - 437 KVA (380V)
• 2 - 555 KVA (460V)
• 2/3 - 578/694 KVA (500/600V)

Input Frequency: 50/60HZ (±3HZ)

Standard Output Voltage*: Four frame sizes are available. Each frame size is line dependent and can power a motor between the following voltages:

• 200 - 240 Vac (line dependent)
• 380 - 480 Vac (line dependent)
• 500 - 600 Vac (line dependent)

*If voltage required for your application is not shown, contact Allen-Bradley for specific application.

Output Current: 2.5 - 673A

Output Power:

• 2 - 116 KVA (230V)
• 2 - 190 KVA (380V)
• 2 - 208 KVA (415V)
• 2 - 537 KVA (460V)
• 2 - 671 KVA (575V)

Note: For information on factors that could effect the power output of the drive please refer to the Enclosure and Derating Guidelines in the Appendix of this manual.

Output Horsepower (Continuous): 7.5 - 650HP

Overload Capability: Continuous - 100% Fundamental current 1 minute - 150%

Output Frequency Range: 0 - 250 HZ

Output Waveform: Sinusoidal (PWM)

Max. Short Circuit Current Rating : 200,000A rms symmetrical, 600 volts (when used with specified AC input line fuses as detailed in Table 2.A).

Ride Through: 2 seconds minimum

Efficiency: 97.5% at rated amps, nominal line volts