|
Drives Service & Support > 1336Z > Specifications
Click for Dimensions
| Application Logic for Fibers Applications | • Programmable inertia ride-through after line-loss detection • Built-in traverse function • Synchronized speed change functionality • Synchronous motor “sync loss” detection and recovery • Phase-locked loop function allows speed command to lock onto a pulse train input |
|
| Operator Interface | • Hand-held HIM available for programming and diagnostics • Multi-language support |
|
| Drive Protection | • Overvoltage and Programmable Undervoltage • Hardware Current Limit and Heatsink Overtemperature • Output Phase-to-Phase and Phase-to-Ground Short Circuit • AC line Input Transient Suppression |
|
| Drive Adjustments | Accel/Decel | 0-600 Seconds in 0.01 Second Increments, Linear or S-Curve |
| Line Loss Recovery | 4 Programmable Options | |
| Stop Mode | Coast/Ramp/Brake/Ramp to Hold | |
| Motor Control | Sensorless Vector; V/Hz | |
| Speed Regulation Mode | Open Loop, Process PI | |
| Traverse | Traverse Inc., Traverse Dec., Max. Traverse, P Jump | |
| Synchronous Speed Change | Sync Time | |
| Synchronous Motor “Sync Loss” | Sync Loss Gain, Sync Loss Time, Sync Loss Comp | |
| Ambient Operating Temperatures | IP 20; NEMA Open Type 0° to 50° C |
|
| Input Specifications | Three-Phase Voltage | +10% of maximum, -50% of nominal (at reduced output power) |
| Frequency | 47 to 63 Hz | |
| Power Loss Ride Through | 30ms at full load | |
| Control Ride Through | 2.5 seconds minimum (not running) | |
| Output Specifications and Dimensions | Voltage | 0 to rated voltage |
| Frequency Range | 0 to 400 Hz | |
| Frequency Accuracy | ± 0.01% of set output frequency from digital setpoint | |
| Speed Regulation | 0.01% (synchronous motor) 0.5% with slip compensation (induction motor) |
|
| Dynamic Response | 12 Radians | |
| Time at Peak Current | 20 Seconds Maximum every 10 Minutes | |
| Current | Varies by catalog number – see table below | |
Note: Current Ratings in 50°C ambient with 2kHz carrier