|
|
|
Drives Service & Support
| Communications |
| Network Protocol |
DF1 |
| Network Data Rates |
- 1200, 2400, 4800, 9600, 19.2K, 38.4K, PGM
- The PGM (Program) setting on the switch is used to set the data rate using the adapter parameter.
|
| Drive Protocol |
DPI |
| Drive Data Rates |
125K or 500K |
| Electrical |
| Consumption |
150 mA at 5 Vdc supplied through the drive |
| Dimensions & Weight |
| Height |
16 mm (0.625 inches) |
| Length |
86 mm (3.39 inches) |
| Width |
81 mm (3.16 inches) |
| Weight |
60g (2 oz.) |
| Environmental |
| Operating Temperature |
-10 to 50°C (14 to 149°F) |
| Storage Temperature |
-40 to +85°C (-40 to 185°F) |
| Relative Humidity |
-5 to 95% non-condensing |
| Atmosphere |
Important: Adapter must not be installed in an area where the ambient atmosphere contains volatile or corrosive gas, vapors or dust. If the adapter is not going to be installed for a period of time, it must be stored in an area where it will not be exposed to a corrosive atmosphere. |
| Regulatory Compliance |
| UL |
508C and CUL |
| CE |
EN61800-3 |
|
