|
|
|
Drives Service & Support
| Input Ratings |
| AC line voltage: |
- 380 to 460 VAC, 3-phase
- 200 to 230 VAC, 3-phase
- 200 to 230 VAC, 1-phase
- 115 VAC, 1-phase
|
| AC line frequency: |
48 to 62 Hz |
| AC line voltage variation: |
+/-10% |
| AC line current |
| Input Voltage |
Unit HP |
Input Current |
| 460 VAC |
1 HP |
2.5 A rms continuous |
| 460 VAC |
2 HP |
4.2 A rms continuous |
| 460 VAC |
3 HP |
6.2 A rms continuous |
| 460 VAC |
5 HP |
9.9 A rms continuous |
| 230 VAC |
1 HP |
4.5 A rms continuous |
| 230 VAC |
2 HP |
7.6 A rms continuous |
| 230 VAC, 1-phase |
1 HP |
5.8 A rms continuous |
| 230 VAC, 1-phase |
2 HP |
14 A rms continuous |
| 115 VAC |
1 HP |
14 A rms continuous |
| Max allowable AC line distribution KVA |
100 KVA maximum for 115 VAC to 460 VAC input |
| Output Ratings |
| Horsepower ratings: |
- 1, 2, 3 and 5 HP at 460 VAC
- 1, 2 HP at 230 VAC
- 1 HP at 115 VAC
|
| Output voltage: |
- 380 to 460 VAC, 3-phase
- 200 to 230 VAC, 3-phase
- 115 VAC, 3-phase
|
| Maximum continuous output current |
| Input Voltage |
Unit HP |
Output Current (Motor Rated Amps) |
| 460 VAC |
1 HP |
1.7 A |
| 460 VAC |
2 HP |
3.2A |
| 460 VAC |
3 HP |
4.5 A |
| 460 VAC |
5HP |
6.9 A |
| 230 VAC |
1 HP |
3.4 A |
| 230 VAC |
2 HP |
6.4 A |
| 230 VAC, 1-phase |
1 HP |
3.4 A |
| 230 VAC, 1-phase |
2HP |
6.4 A |
| 115 VAC |
1 HP |
6.8 A |
| Maximum output current: |
| Input Voltage |
Unit HP |
Maximum Output Current
(150% Rated Amps) |
| 460 VAC |
1 HP |
2.55 A |
| 460 VAC |
2 HP |
4.8 A |
| 460 VAC |
3 HP |
6.75 A |
| 460 VAC |
5 HP |
10.35 A |
| 230 VAC |
1 HP |
5.1 A |
| 230 VAC |
2 HP |
9.6 A |
| 230 VAC, 1-phase |
1 HP |
5.1 A |
| 230 VAC, 1-phase |
2 HP |
9.6 A |
| 115 VAC |
1 HP |
10.2 A |
| Important: Maximum current ratings above are for the CT rating. When selected, the maximum output current will be limited to 110%. |
| Output frequency |
3 to 120 Hz |
| Carrier frequency |
8 kHz |
| Operating Performance |
| Speed regulation |
1% (1% of base speed, 180 to 1800 RPM, constant torque) |
| Speed range |
20:1 (90 to 1800 RPM, constant torque) |
| Voltage regulation: |
3% of maximum rated voltage |
| Power dip ride-through time: |
500 msec minimum |
| Drive efficiency: |
>95% (at rated amps, 115-460 V, 60 Hz) |
| Operating Specifications |
| Operating temperature |
0°C to 40°C (32°F to 104°F) ambient |
| Storage temperature |
-40°C to 65°C (-40°F to 149°F) |
| Altitude |
1000 meters (3300 feet maximum) without derating. For every 91.4 (300 feet) above 1000 meters, derate the current by 1%. Above 3000 (10,000 feet), consult your Allen-Bradley Sales Office |
| Humidity |
5% to 95%, non-condensing |
| Service factor |
1.0 |
| Mechanical Specifications |
| Motor enclosure type |
Totally enclosed, 24 VDC blower cooled (TEBC) |
| Required airflow |
Required clearance for blower intake = 1 in |
| Drive Protection/Fault Detection |
| Output overcurrent |
Trip level = 200% of max peak rated current |
| Output ground fault |
Trip level = 200% of max peak rated current |
| DC bus overvoltage |
| Line Voltage |
Trip Level |
| 460 VAC |
830 VDC |
| 230 VAC |
415 VDC |
| 115 VAC |
208 VDC |
| Motor thermal overload: |
- Trip time = 1 minute at 150% of rated current (CT)
- Trip time = 1 minute at 110% of rated current (VT)
|
| DC bus undervoltage |
| Line Voltage |
Trip Level |
| 460 VAC |
435 VDC |
| 380 VAC |
358 VDC |
| 230 VAC |
218 VDC |
| 115 VAC |
109 VDC |
| I/O Specifications |
|
| Important: All signals are isolated from the incoming 3-phase power. |
| Analog inputs |
|
| 0 to 10 V |
- Input impedance: 50 kW
- Resolution: 0.11%
|
| 4 to 20 mA |
- Input impedance: 250 W
- Resolution: 0.14%
|
| Analog output |
|
| 0 to 10 V |
- Minimum load resistance: 2 kW
- Resolution: 0.4%
|
| Logic inputs (Stop, Start, Reset, Fwd/Rev, RPM/%Load, Function Loss, Preset Speed) |
| 24 VDC sourcing inputs |
- Maximum input voltage: 28.8 VDC
- Input current @ 24 VDC: 10 ma
- Maximum OFF state voltage: 5 VDC
- Minimum ON state voltage: 15 VDC
|
| Relay output (1 form A N.O. contact) |
| Maximum current (resistive or inductive) |
1 A |
| Minimum current |
10 ma |
| Maximum voltage |
28 VDC, 250 VAC |
| Approvals and Standards Compliance |
| Approvals |
| Designed to meet these standards: |
- FCC Class A and B, ICE 146-1-1, VDE 0871 and VDE 0875
- U L ®
- UL508C U L ®
- C CSA 22.2
|
|
