|
Human Interface Module (HIM) Kits - User Installed
IP 20 (NEMA Type 1) HIM, SNAP IN
Used with IP00 (Open) A-G Frame and IP 20 (NEMA 1) A-D Frame Drives
| Blank Cover Plate | 1201-HASB |
| Programmer ONLY | 1201-HASP |
| Programmer ONLY & Upload/Download Capable | 1201-HCSP |
| Programmer/Controller with Analog Pot | 1201-HAS1 |
| Programmer/Controller with Analog Pot & Upload/Download Capable | 1201-HCS1 |
| Programmer/Controller with Digital Speed Control | 1201-HAS2 |
| Programmer/Controller with Digital Speed Control & Upload/Download Capable | 1201-HCS2 |
IP 20 (NEMA Type 1) HIM, HAND HELD
Used with IP 20 (NEMA 1) E-G Frame Drives & F Frame "AE" Style Enclosures
| Programmer ONLY | 1201-HAP |
| Programmer/Controller with Analog Pot | 1201-HA1 |
| Programmer/Controller with Digial Speed Control | 1201-HA2 |
IP 65 (NEMA Type 12/UL Type 4X Indoor) HIM
Used with IP 66 (NEMA Type 12/UL Type 4X Indoor) Enclosures
| Programmer ONLY | 1201-HJP† |
| Programmer/Controller with Digital Speed Control | 1201-HJ2† |
or UL Type 4X OUTDOOR duty.
Optional Cable Kit - HIM to Communications Port
Used with ALL HIM's not on the drive chassis.
| 1.1 Feet (0.33 Meters) Cable | 1202-C03 |
| 3.3 Feet (1 Meter) Cable | 1202-C10 |
| 9.8 Feet (3 Meter) Cable | 1202-C30 |
| 29.5 Feet (9 Meter) Cable | 1202-C90 |
Note: It is VERY IMPORTANT that you DO NOT exceed 33 TOTAL FEET of ScanPort Cable per drive.
ScanPort errors WILL occur if you do!
IP 20 (NEMA Type 1) Door Mount Bezel Kit
Used with User Supplied IP 20 (NEMA Type 1) Enclosures and HIM
| Door Mount Bezel Kit | 1201-DMA |
ScanPort Expander Option
Used with all ScanPort Drives
| One to Two Port Expander Module | 1203-SG2 |
| One to Four Port Expander Module | 1203-SG4 |
| One to Two Port Splitter Cable | 1203-S03 |