|
Click for Dimensions
Click for Drive Ratings
| Category | Specifications |
|
| Environment | Altitude | 1000 m (3300 ft) max. without derating |
Ambient Operating Temperature |
IP20: –10 to 50 degrees C (14 to 122 degrees F) |
|
| Cooling Method |
Convection: 0.2 kW (0.25 HP) drive ratings, Catalog Numbers 22A-V1P5N104, 22A-A1P5N114, 22A-A1P5104 and 22A-B1P5N104 Fan: All other drive ratings. |
|
| Storage Temperature: | –40 to 85 degrees C (–40 to 185 degrees F) | |
| Atmosphere: | Important: Drive must not be installed in an area where the ambient atmosphere contains volatile or corrosive gas, vapors or dust. If the drive is not going to be installed for a period of time, it must be stored in an area where it will not be exposed to a corrosive atmosphere. | |
| Relative Humidity: | 0 to 95% non-condensing | |
| Shock (operating): | 15G peak for 11ms duration (±1.0ms) | |
| Vibration (operating): | 1G peak, 5 to 2000 Hz | |
| Control | Carrier Frequency | 2-16 kHz. Drive rating based on 4 kHz. |
| Frequency Accuracy | Digital Input: Within ±0.05% of set output frequency. Analog Input: Within 0.5% of maximum output frequency. |
|
| Speed Regulation - Open Loop with Slip Compensation: |
±2% of base speed across a 40:1 speed range. | |
| Stop Modes: | Multiple programmable stop modes including - Ramp, Coast, DC-Brake, Ramp-to-Hold and S Curve. | |
| Accel/Decel: | Two independently programmable accel and decel times. Each time may be programmed from 0 - 600 seconds in 0.1 second increments. | |
| Intermittent Overload: | 150% Overload capability for up to 1 minute 200% Overload capability for up to 3 seconds |
|
| Electronic Motor Overload Protection |
Class 10 protection with speed sensitive response. |
|