|
Drives Service & Support > PowerFlex 700 > Fault Finder Fault Number : 33 Fault Display : Auto Rstrt Tries Fault Name : Auto Restart Tries Fault Type : 3 - User Configurable Fault Description : Drive unsuccessfully attempted to reset a fault and resume running for the programmed number of [Flt RstRun Tries]. Corrective Action : This fault can be enabled / disabled by using [Fault Config 1] parameter using bit number 5. Default in the Fault config parameter is disabled. This indicates that a fault is not clearing, or the fault preset cannot be cleared. This fault works with two different parameters. They are parameter 174 [Auto Rstrt Tries] and parameter 175 [Auto Rstrt Delay]. When a fault occurs, the drive looks to parameter 174 [Auto Rstrt Tries] to see how many times the drive should attempt to reset a fault, and restart. If the fault does not clear, it then looks to parameter 175 [Auto Rstrt Delay] to see how long it should wait until it tries to reset the fault and restart. After this procedure has looped the number of times programmed into parameter 174 [Auto Rstrt Tries]. After this amount of tries has been exceeded, this fault will occur.
|
 |
