Drives Service & Support > Powerflex 700S > FAQ

Q1: How can I install the FlexBus cable on the DriveLogix processor without the cover getting in the way?
A2: Technical support has been given special DriveLogix covers that contain a "cut-out" area where the FlexBus cable extends.

Q2: Will the new DriveExecutive software communicate with my PowerFlex 700S AC drive using a 1203-SSS module?
A2: Yes, as long as the 1203-SSS module firmware is version 3.003 or greater.

Q3: I am having trouble understanding the PowerFlex 700S User Manual. There is just too much information. Is there an easier start-up guide?
A3: Yes. We now offer a PowerFlex 700S Quick Start guide, publication 20D-QS001A-EN-P. You can obtain it from Manuals Online at: http://literature.rockwellautomation.com

Q4: Are there any application guides that I can reference?
A4: Yes. Most of the application guides and technical notes can be found on the PowerFlex 700S website at: http://www.ab.com/support/abdrives/Powerflex 700S/tech.html

Q5: Where can I find the correct EDS files for my PowerFlex 700S AC drive, both ControlNet and DeviceNet?
A5: You may either click on EDS Files from the main page of the PowerFlex 700S website or contact technical support at (262) 512-8176.

Q6: What is the tightest I can bend the fiber optic cable of the PowerFlex 700S SynchLink cable?
A6: Strain relief requirements for SynchLink fiber optic cable routing has determined that the bend radius for the cable is 1 inch.